Bosch BGS 4U2234 - Инструкция по эксплуатации - Страница 47

40

Cleaning a washable (H)EPA filter

The (H)EPA filter with the "washable" imprint is desig-
ned so that it does not need to be replaced, provided 
the appliance is used as intended in the household.
To ensure that the vacuum cleaner is working at its op -
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re -
mains intact, even if the filter sur face becomes disco -
loured.

Fig. 

27*

a) 

Open the lid of the exhaust filter by pushing and 
pulling on the locking tab.

b) 

Unlock the (H)EPA filter and remove it from the ap -
pliance.

c) 

Tap out the filter unit and rinse it under running wa-
ter. 

 Alternatively, the unit can be cleaned in a washing 
machine at max. 30 °C using a gentle programme 
and the lowest spin speed.  

TIP:

  To protect other laundr y items, put the filter 

unit into a laundr y bag.

d) 

Once the (H)EPA filter has dried completely (at least 
24 hours), inser t it back into the appliance and lock 
it in place.

>

= Close the exhaust filter lid. In doing so, push the 

lock bar upwards until it audibly clicks into place.

Replacing the (H)EPA filter

(only for appliances without a washable (H)EPA filter) 
To ensure that the vacuum cleaner can work at its opti-
mum power level, the (H)EPA filter should be replaced 
after one year.

Fig. 

28*

a) 

Open the lid of the exhaust filter by pushing and 
pulling on the locking tab.

b) 

Unlock the (H)EPA filter and remove it from the ap -
pliance.

c) 

Dispose of the old (H)EPA filter with your household 
waste.

d) 

Inser t the new (H)EPA filter into the appliance and 
lock it in place.

>

= Close the exhaust filter lid. In doing so, push the 

lock bar upwards until it audibly clicks into place.

Micro filter

Cleaning the micro filter

The micro filter is designed so that it does not need to 
be replaced, provided the appliance is used as inten-
ded in the household.
To ensure that the vacuum cleaner is working at its op -
timum power level, the exhaust filter should be rinsed 
out after one year. The filtering action of the filter re -
mains intact, even if the filter sur face becomes disco -
loured.

Fig. 

29*

a) 

Open the lid of the exhaust filter by pushing and 
pulling on the locking tab.

b) 

Pull the locking tab to unlock the filter unit with foam 
filter and microfilter and remove it from the appli-
ance.

c) 

Remove the foam filter and microfilter from the filter 
frame.

d) 

Rinse the foam filter and micro filter under run-
ning water. Alternatively, they can be cleaned 
in the washing machine at max. 30 °C using a 
gentle programme and the lowest spin speed. 

TIP:

  To protect other laundr y items, put the unit into 

a laundr y bag.

e) 

Once the foam filter and microfilter have dried com-
pletely (at least 24 hours), inser t them back into the 
filter frame.

f) 

Inser t the filter unit in the appliance and ensure that 
the locking tabs audibly click into place.

g) 

Close the exhaust filter lid. In doing so, push the lock 
bar upwards until it audibly clicks into place.

Cleaning instructions

Always switch off the vacuum cleaner and disconnect 
the power cord from the mains before cleaning the va-
cuum cleaner. The vacuum cleaner and plastic acces-
sories can be cleaned with an ordinar y plastic cleaner.

!

 Caution: 
   Do not use abrasive materials, glass- cleaning 

agents or all-purpose cleaning products. Never im -
merse the vacuum cleaner in water.

Subject to technical modifications.

* Dependent on model