Yamaha CD-S300 - Инструкция по эксплуатации - Страница 4

iii 

En

1

To assure the finest performance, please read this manual 
carefully. Keep it in a safe place for future reference.

2

Install this sound system in a well ventilated, cool, dry, clean 
place – away from direct sunlight, heat sources, vibration, 
dust, moisture, and/or cold. For proper ventilation, allow the 
following minimum clearances.
Top : 2.5 cm (1 inch)
Rear: 2.5 cm (1 inch)
Sides: 2.5 cm (1 inch)

3

Locate this unit away from other electrical appliances, motors, 
or transformers to avoid humming sounds.

4

Do not expose this unit to sudden temperature changes from 
cold to hot, and do not locate this unit in an environment with 
high humidity (i.e. a room with a humidifier) to prevent 
condensation inside this unit, which may cause an electrical 
shock, fire, damage to this unit, and/or personal injury.

5

Avoid installing this unit where foreign objects may fall onto 
this unit and/or this unit may be exposed to liquid dripping or 
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or 

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, 

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid 

may cause electrical shock to the user and/or damage to 
this unit.

6

Do not cover this unit with a newspaper, tablecloth, curtain, 
etc. in order not to obstruct heat radiation. If the temperature 
inside this unit rises, it may cause fire, damage to this unit, 
and/or personal injury.

7

Do not plug in this unit to a wall outlet until all connections 
are complete.

8

Do not operate this unit upside-down. It may overheat, 
possibly causing damage.

9

Do not use force on switches, knobs and/or cords.

10

When disconnecting the power cable from the wall outlet, 
grasp the plug; do not pull the cable.

11

Do not clean this unit with chemical solvents; this might 
damage the finish. Use a clean, dry cloth.

12

Only voltage specified on this unit must be used. Using this 
unit with a higher voltage than specified is dangerous and may 
cause fire, damage to this unit, and/or personal injury. 
Yamaha will not be held responsible for any damage resulting 
from use of this unit with a voltage other than specified.

13

To prevent damage by lightning, keep the power cord 
disconnected from a wall outlet or the unit during a lightning 
storm.

14

Do not attempt to modify or fix this unit. Contact qualified 
Yamaha service personnel when any service is needed. The 
cabinet should never be opened for any reasons.

15

When not planning to use this unit for long periods of time 
(i.e. vacation), disconnect the power cable from the wall 
outlet.

16

Install this unit near the wall outlet and where the power cable 
can be reached easily.

17

Be sure to read the “TROUBLESHOOTING” section in this 
manual on common operating errors before concluding that 
this unit is faulty.

18

Before moving this unit, press   to turn off this unit and then 
disconnect the power cable from the wall outlet.

19

The batteries shall not be exposed to excessive heat such as 
sunshine, fire or like.

20

VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit 
must be set for your local main voltage BEFORE plugging 
into the wall outlet. Voltages are:

.....................................AC 110/120/220/230-240 V, 50/60 Hz

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a qualified 
service person should remove the cover or attempt to service this 
device.

DANGER

This unit emits visible laser radiation when open. Avoid direct eye 
exposure to beam. When this unit is plugged into the wall outlet, do 
not place your eyes close to the opening of the disc tray and other 
openings to look into inside.

■

For U.K. customers

If the socket outlets in the home are not suitable for the 
plug supplied with this appliance, it should be cut off and 
an appropriate 3 pin plug fitted. For details, refer to the 
instructions described below.

The plug severed from the mains lead must be destroyed, as a 
plug with bared flexible cord is hazardous if engaged in a live 
socket outlet.

■

Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

As long as this unit is connected to the wall outlet, it is 
not disconnected from the AC power source even if 
you turn off this unit by  .

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN 
OR MOISTURE.

The laser component in this product is capable of 
emitting radiation exceeding the limit for Class 1.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN 
ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of this apparatus 

may not correspond with the coloured markings identifying 

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the 

terminal which is marked with the letter N or coloured 

BLACK. The wire which is coloured BROWN must be 

connected to the terminal which is marked with the letter L or 

coloured RED.

Making sure that neither core is connected to the earth 

terminal of the three pin plug.