Yamaha BD-S671 - Инструкция по эксплуатации - Страница 80

SETUP MENU

34

 En

■

Audio Setting

The default settings are marked with “ 

*

”.

Audio Output

Coaxial/Optical

You can select the output mode of COAXIAL jack and 
OPTICAL terminal. For more details on output formats, 
refer to “About the audio output formats” (p. 35).

HDMI

You can select the output mode of HDMI terminal. For 
details on setting items, see “Coaxial/Optical” (p. 34). For 
more details on output formats, refer to “About the audio 
output formats” (p. 35).

Bitstream

*

, PCM, Reencode, Off

– To output HD audio (such as Dolby TrueHD or 

DTS-HD Master Audio) from HDMI terminal, set 
Resolution to Auto or more than 720p (p. 33).

Downsampling

You can select digital audio signal down-sample 
frequency. This function is effective for the audio signal 
output from the COAXIAL jack/OPTICAL terminal.

DRC

You can set the DRC (Dynamic Range Compression) 
(p. 41) to on/off/Auto. When set to Auto, DRC is 
automatically turned on for a source with DRC 
information in Dolby TrueHD format. DRC makes the 
strong sound such as plosive sound lower, and 
conversations more audible. It is useful when you watch 
movies in the night.

Off, On, Auto

*

Speaker Setting

2ch Downmix

You can select down mix method to analog 2-ch from 
Stereo or Lt/Rt.

Post Process

Up Mix

You can multi-channelize the 2-channel audio signal. To 
multi-channelize, select NEO6, then select Cinema or 
Music mode.

Off

*

, NEO6

■

System Information

Software version and MAC address (p. 42) are displayed.

Bitstream

Outputs digital signal without any processing. 
Secondary Audio is not output.

PCM

Outputs 2-channel PCM.

Reencode

*

Outputs Bitstream with Secondary Audio.

Off

Mutes sound.

Note

48k

*

The highest sampling rate of digital PCM output is 
48 kHz.

96k

The highest sampling rate of digital PCM output is 
96 kHz.

192k

The highest sampling rate of digital PCM output is 
192 kHz.

Lt/Rt

Select this item if this unit is connected to a Dolby 
Pro Logic decoder. Sound from rear speakers is 
mixed to the 2-ch stereo sound.

Stereo

*

Changes channel output to stereo, which only 
delivers sound from the two front speakers.