Viking EVGR530-4BAG - Инструкция по эксплуатации - Страница 15

15

BAKE 

(Natural Airflow Bake)

Full power heat is radiated from the bake burners in the bottom of the oven cavity and is
circulated with natural airflow. This function is recommended for single rack baking. Many
cookbooks contain recipes to be cooked in the conventional manner. Conventional baking
is suitable for dishes that require a high temperature. Use this setting for baking and
casseroles.

To Use BAKE Function

1. Arrange the oven rack in the desired position before turning oven on.
2. Close the door.
3. Set the oven temperature control knob to desired temperature.

CONVECTION BAKE

Heat is radiated from the U- shaped bake burners in the bottom of the oven cavity. The
heated air is circulated by one motorized fan in the rear of the oven providing a more
even heat distribution. Multiple rack use is possible for the largest baking job. When
roasting, cool air is quickly replaced—searing meats on the outside and retaining more
juices and natural flavor on the inside with less shrinkage. This even circulation of air
equalizes the temperature throughout the oven cavity and eliminates the hot and cold
spots found in conventional ovens.

To Use CONVECTION BAKE Function

1. Arrange the oven rack in the desired position before turning oven on.
2. Close the door.
3. Set the oven temperature control knob to desired temperature and turn on the convection fan switch.

Baking

Baking Tips

•  Make sure the oven racks are in the desired position before you turn on the oven.
• 

DO NOT 

open the door frequently during baking. Look through the door window to check doneness whenever possible. If you must

open 

the door, the best time is during the last quarter of the baking time.

•  Bake to the shortest time suggested and check for doneness before adding more time. For baked goods, a stainless steel knife placed

in the center of the product should come out clean when done.

•  Use the pan size and type recommended by the recipe to ensure best results. Cakes, quick breads, muffins, and cookies should be

baked in shiny, reflective pans for light, golden crusts. Avoid the use of old, darkened pans. Warped, dented, stainless steel and tin-
coated pans heat unevenly and will not give uniform baking results.

Pan Placement Tips

• When using large (15" x 13") flat pans or trays that cover most of the rack, rack positions 2 or 3 produce the best results.
• When baking on more than one rack, it is recommended to use the 3rd and 5th position for more consistent even baking.
• Stagger pans in opposite directions when two racks and several pans are used in conventional bake. If possible, no pan should be

directly above another.

• Allow 1 to 2 inches of air space around all sides of each

pan for even air circulation.

Single Rack Pan

Placement

Multiple Rack Pan

Placement