Smeg SUK91MFX9 - Инструкция по эксплуатации - Страница 6

Instructions

60

•  The adjustment conditions for 

this appliance are shown on 
the gas setting label.

• Have the gas connection 

performed by authorised staff.

• Installation using a hose must 

be carried out so that the length 
of the hose does not exceed 
2 metres when fully extended 
for steel hoses and 1.5 metres 
for rubber hoses.

• The hoses should not come into 

contact with moving parts and 
should not be crushed in any 
way.

• If required, use a pressure 

regulator that complies with 
current regulations.

• After carrying out any 

operation, check that the 
tightening torque of gas 
connections is between 10  Nm 
and 15 Nm.

• At the end of the installation, 

check for any leaks with a 
soapy solution, never with a 
flame.

• Have the electrical connection 

performed by authorised 
technicians.

• The appliance must be 

connected to ground in 
compliance with electrical 
system safety standards.

• Use cables withstanding a 

temperature of at least 90 °C.

• The tightening torque of the 

screws of the terminal board 
leads must be 1.5 - 2 Nm.

For this appliance

• Ensure that the appliance is 

switched off before replacing 
the bulb.

• Do not rest any weight or sit on 

the open door of the 
appliance.

• Take care that no objects are 

stuck in the doors.

1.2 Manufacturer liability

The manufacturer declines all 
liability for damage to persons or 
property caused by:
•  use of the appliance other than 

that specified;

•  failure to comply with the 

instructions in the user manual;

•  tampering with any part of the 

appliance;