Smeg SUK91MFX9 - Инструкция по эксплуатации - Страница 29

Cleaning and maintenance

83

EN

4.1 Cleaning the hob

Cooking hob grids

Remove the grids and clean them in 
lukewarm water and non-abrasive 
detergent. Make sure to remove any 
encrustations. Dry them thoroughly and 
return them to the hob.

Flame-spreader crowns and burner caps

For easier cleaning, the flame-spreader 
crowns and the burner caps can be 
removed. Wash them in hot water and non-
abrasive detergent. Carefully remove any 
encrustation, then wait until they are 
perfectly dry. Refit the flame-spreader 
crowns making sure that they are correctly 
positioned in their housings with their 
respective burner caps.

Igniters and thermocouples

For correct operation the igniters and 
thermocouples must always be perfectly 
clean. Check them frequently and clean 
them with a damp cloth if necessary. 
Remove any dry residues with a wooden 
toothpick or a needle.

Knobs

The knobs should be cleaned with a soft 
cloth dampened with warm water, then 
dried carefully. They can be removed by 
pulling them out of their housing.

The continuous contact between 
the grids and the flame can cause 
modifications to the enamel over 
time in those parts exposed to 
heat. This is a completely natural 
phenomenon which has no effect 
on the operation of this 
component.

Do not use aggressive products 
containing alcohol or products for 
cleaning steel and glass when 
cleaning the knobs, as these 
products could cause permanent 
damage.