Smeg SUK91MFX9 - Инструкция по эксплуатации - Страница 34

Cleaning and maintenance

88

Vapor Clean setting

1. Turn the function knob to the symbol 

 and 

the temperature knob to the symbol 

.

2. Set a cooking time of 18 minutes using 

the programmer clock.

The Vapor Clean cycle starts a few seconds 
after the last press on the programmer clock 
keys.
3. At the end of the Vapor Clean cycle, the 

timer will deactivate the oven heating 
elements, the buzzer will start to sound 
and the numbers on the programmer 
clock dial will flash.

End of the Vapor Clean cycle

4. Open the door and wipe away the less 

stubborn dirt with a microfibre cloth.

5. Use an anti-scratch sponge with brass 

filaments on tougher encrustations.

6. In case of grease residues use specific 

oven cleaning products.

7. Remove the water left inside the oven.

For improved hygiene and to avoid food 
being affected by any unpleasant odours, 
we recommend that the oven is dried using 
a fan assisted function at 160 °C for 
approximately 10 minutes.

4.5 Extraordinary maintenance

Installing and removing the seal

To remove the seal:
•  Unhook the clips in the 4 corners and in 

the centre, then pull the seal.

To refit the seal:
•  Hook the clips in the 4 corners and in the 

centre onto the seal.

Seal maintenance tips

The seal should be soft and elastic.
•  To keep the seal clean, use a non-

abrasive sponge and lukewarm water to 
wash it.

We recommend wearing rubber 
gloves for these operations.

For easier manual cleaning of the 
parts difficult to reach, we 
recommend removing the door.