Makita DHS782ZJ - Инструкция по эксплуатации - Страница 13

13 ENGLISH

A battery short can cause a large current flow, over

-

heating, possible burns and even a breakdown.

6. 

Do not store the tool and battery cartridge in 

locations where the temperature may reach or 

exceed 50 °C (122 °F).

7. 

Do not incinerate the battery cartridge even if 

it is severely damaged or is completely worn 

out. The battery cartridge can explode in a fire.

8. 

Be careful not to drop or strike battery.

9. 

Do not use a damaged battery.

10. 

The contained lithium-ion batteries are subject to 

the Dangerous Goods Legislation requirements. 

For commercial transports e.g. by third parties, 

forwarding agents, special requirement on pack-

aging and labeling must be observed. 

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required. 

Please also observe possibly more detailed 

national regulations. 

Tape or mask off open contacts and pack up the 

battery in such a manner that it cannot move 

around in the packaging.

11. 

Follow your local regulations relating to dis-

posal of battery.

12. 

Use the batteries only with the products 

specified by Makita.

 Installing the batteries to 

non-compliant products may result in a fire, exces

-

sive heat, explosion, or leak of electrolyte.

SAVE THESE INSTRUCTIONS.

CAUTION:

Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that 

have been altered, may result in the battery bursting 

causing fires, personal injury and damage. It will also 

void the Makita warranty for the Makita tool and charger.

Tips for maintaining maximum 

battery life

1. 

Charge the battery cartridge before completely 

discharged. Always stop tool operation and 

charge the battery cartridge when you notice 

less tool power.

2. 

Never recharge a fully charged battery cartridge. 

Overcharging shortens the battery service life.

3. 

Charge the battery cartridge with room tempera-

ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot 

battery cartridge cool down before charging it.

4. 

Charge the battery cartridge if you do not use 

it for a long period (more than six months). 

Important safety instructions for 

wireless unit

1. 

Do not disassemble or tamper with the wire-

less unit.

2. 

Keep the wireless unit away from young chil-

dren. If accidentally swallowed, seek medical 

attention immediately.

3. 

Use the wireless unit only with Makita tools.

4. 

Do not expose the wireless unit to rain or wet 

conditions.

5. 

Do not use the wireless unit in places where 

the temperature exceeds 50°C (122°F).

6. 

Do not operate the wireless unit in places 

where medical instruments, such as heart 

pace makers are nearby.

7. 

Do not operate the wireless unit in places where 

automated devices are nearby.

 If operated, auto-

mated devices may develop malfunction or error.

8. 

Do not operate the wireless unit in places 

under high temperature or places where 

static electricity or electrical noise could be 

generated.

9. 

The wireless unit can produce electromagnetic 

fields (EMF) but they are not harmful to the user.

10. 

The wireless unit is an accurate instrument. Be 

careful not to drop or strike the wireless unit.

11. 

Avoid touching the terminal of the wireless 

unit with bare hands or metallic materials.

12. 

Always remove the battery on the product 

when installing the wireless unit into it.

13. 

When opening the lid of the slot, avoid the 

place where dust and water may come into the 

slot. Always keep the inlet of the slot clean.

14. 

Always insert the wireless unit in the correct 

direction.

15. 

Do not press the wireless activation button 

on the wireless unit too hard and/or press the 

button with an object with a sharp edge.

16. 

Always close the lid of the slot when 

operating.

17. 

Do not remove the wireless unit from the slot 

while the power is being supplied to the tool.

Doing so may cause a malfunction of the wireless 

unit.

18. 

Do not remove the sticker on the wireless unit.

19. 

Do not put any sticker on the wireless unit.

20. 

Do not leave the wireless unit in a place where 

static electricity or electrical noise could be 

generated.

21. 

Do not leave the wireless unit in a place sub-

ject to high heat, such as a car sitting in the 

sun.

22. 

Do not leave the wireless unit in a dusty or 

powdery place or in a place corrosive gas 

could be generated.

23. 

Sudden change of the temperature may bedew 

the wireless unit. Do not use the wireless unit 

until the dew is completely dried. 

24. 

When cleaning the wireless unit, gently wipe 

with a dry soft cloth. Do not use benzine, thin-

ner, conductive grease or the like.

25. 

When storing the wireless unit, keep it in the 

supplied case or a static-free container.

26. 

Do not insert any devices other than Makita 

wireless unit into the slot on the tool.

27. 

Do not use the tool with the lid of the slot dam-

aged.

 Water, dust, and dirt come into the slot may 

cause malfunction.

28. 

Do not pull and/or twist the lid of the slot more 

than necessary. 

Restore the lid if it comes off 

from the tool.

29. 

Replace the lid of the slot if it is lost or 

damaged.

SAVE THESE INSTRUCTIONS.