Makita HR2653 - Инструкция по эксплуатации - Страница 9

9 ENGLISH

Model HR2653

Work mode

Vibration 

emission

Uncertainty (K) Applicable 

standard

Hammer 

drilling into 

concrete 

(a

h, HD

)

11.5 m/s

2

1.5 m/s

2

EN60745-2-6

Chiselling func-

tion with side 

grip (a

h, Cheq

)

9.0 m/s

2

1.5 m/s

2

EN60745-2-6

Drilling into 

metal (a

h, D

)

2.5 m/s

2

1.5 m/s

2

EN60745-2-1

Model HR2653T

Work mode

Vibration 

emission

Uncertainty (K) Applicable 

standard

Hammer 

drilling into 

concrete 

(a

h, HD

)

11.5 m/s

2

1.5 m/s

2

EN60745-2-6

Chiselling func-

tion with side 

grip (a

h, Cheq

)

9.0 m/s

2

1.5 m/s

2

EN60745-2-6

Drilling into 

metal (a

h, D

)

2.5 m/s

2

1.5 m/s

2

EN60745-2-1

Model HR2663

Work mode

Vibration 

emission

Uncertainty (K) Applicable 

standard

Hammer 

drilling into 

concrete 

(a

h, HD

)

9.5 m/s

2

1.5 m/s

2

EN60745-2-6

Chiselling func-

tion with side 

grip (a

h, Cheq

)

6.0 m/s

2

1.5 m/s

2

EN60745-2-6

Drilling into 

metal (a

h, D

)

2.5 m/s

2

 or 

less

1.5 m/s

2

EN60745-2-1

NOTE:

 The declared vibration total value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared vibration total value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

The vibration emission during 

actual use of the power tool can differ from the 

declared value(s) depending on the ways in which 

the tool is used especially what kind of workpiece 

is processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A 

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specifications provided 

with this power tool.

 Failure to follow all instructions 

listed below may result in electric shock, fire and/or 

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

ROTARY HAMMER SAFETY WARNINGS

1. 

Wear ear protectors.

 Exposure to noise can 

cause hearing loss.

2. 

Use auxiliary handle(s), if supplied with the 

tool.

 Loss of control can cause personal injury.

3. 

Hold power tool by insulated gripping surfaces, 

when performing an operation where the cutting 

accessory may contact hidden wiring or its own 

cord.

 Cutting accessory contacting a "live" wire may 

make exposed metal parts of the power tool "live" 

and could give the operator an electric shock.

4. 

Wear a hard hat (safety helmet), safety glasses 

and/or face shield. Ordinary eye or sun glasses 

are NOT safety glasses. It is also highly recom-

mended that you wear a dust mask and thickly 

padded gloves.

5. 

Be sure the bit is secured in place before operation.

6. 

Under normal operation, the tool is designed to 

produce vibration. The screws can come loose 

easily, causing a breakdown or accident. Check 

tightness of screws carefully before operation.

7. 

In cold weather or when the tool has not been 

used for a long time, let the tool warm up for 

a while by operating it under no load. This 

will loosen up the lubrication. Without proper 

warm-up, hammering operation is difficult.

8. 

Always be sure you have a firm footing. Be 

sure no one is below when using the tool in 

high locations.

9. 

Hold the tool firmly with both hands.

10. 

Keep hands away from moving parts.

11. 

Do not leave the tool running. Operate the tool 

only when hand-held.

12. 

Do not point the tool at any one in the area 

when operating. The bit could fly out and 

injure someone seriously.

13. 

Do not touch the bit, parts close to the bit, or 

workpiece immediately after operation; they may 

be extremely hot and could burn your skin.

14. 

Some material contains chemicals which may be 

toxic. Take caution to prevent dust inhalation and 

skin contact. Follow material supplier safety data.

15. 

Do not touch the power plug with wet hands.

SAVE THESE INSTRUCTIONS.