Makita HR2653 - Инструкция по эксплуатации - Страница 8

8 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

HR2652

HR2653

HR2653T

HR2663

Capacities

Concrete

26 mm

Core bit

68 mm

Diamond core bit (dry type)

80 mm

Steel

13 mm

Wood

32 mm

No load speed

0 - 1,200 min

-1

0 - 1,100 min

-1

Blows per minute

0 - 4,600 min

-1

0 - 4,500 min

-1

Overall length

604 mm

630 mm

666 mm

Net weight

3.0 - 4.3 kg

3.1 - 4.3 kg

3.2 - 4.5 kg

3.3 - 4.6 kg

Safety class

/II

• 

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• 

Specifications may differ from country to country.

• 

The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to 

EPTA-Procedure 01/2014, are shown in the table.

Intended use

The tool is intended for hammer drilling and drilling in 

brick, concrete and stone. 

It is also suitable for drilling without impact in wood, 

metal, ceramic and plastic.

Power supply

The tool should be connected only to a power supply of 

the same voltage as indicated on the nameplate, and 

can only be operated on single-phase AC supply. They 

are double-insulated and can, therefore, also be used 

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-6:

Model HR2652

Sound pressure level (L

pA

) : 91 dB(A)

Sound power level (L

WA

) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

Model HR2653

Sound pressure level (L

pA

) : 92 dB(A)

Sound power level (L

WA

) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model HR2653T

Sound pressure level (L

pA

) : 92 dB(A)

Sound power level (L

WA

) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model HR2663

Sound pressure level (L

pA

) : 90 dB(A)

Sound power level (L

WA

) : 101 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

 The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may also 

be used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).

Vibration

The following table shows the vibration total value 

(tri-axial vector sum) determined according to applica-

ble standard.

Model HR2652

Work mode

Vibration 

emission

Uncertainty (K) Applicable 

standard

Hammer 

drilling into 

concrete 

(a

h, HD

)

12.5 m/s

2

1.5 m/s

2

EN60745-2-6

Chiselling func-

tion with side 

grip (a

h, Cheq

)

9.5 m/s

2

1.5 m/s

2

EN60745-2-6

Drilling into 

metal (a

h, D

)

2.5 m/s

2

1.5 m/s

2

EN60745-2-1