Bort BDR-1200 - Инструкция по эксплуатации - Страница 13

13

– before maintenance .

Child safety lock

This product is equipped with a child safety lock 4:

Activate

(position: locked lock)

Fully push in the symbol of

the child safety lock 4 . The 

steam trigger 5 can now no 

longer be pressed down .

Deactivate

(position: open lock)

Fully push in the symbol of

the child safety lock 4 . The 

steam trigger 5 can now be 

used again .

Steaming

WARNING! 

The product has to be maintained 

in an upright position

– while being used,
– under pressure or
– filled with water .
Hold the product by its handle 6  .

NOTES:

•  Controlling the steam output: Gradually press the 

steam trigger 5 .
•  Stop steaming when the steam indicator 17 goes off . 

Wait until the steam indicator 17 lights up again . You may 

now resume with the work .
•  If there is no steam output – although the steam in-

dicator 17 is on: Disconnect the power plug 7 from the 

mains socket . Refill the water tank 2 .

CLEANING AND CARE

Cleaning the main unit

DANGER! 

Risk of electric shock! Before clean-

ing and maintenance: Disconnect the power 

plug 7 from the mains socket .

WARNING! 

Do not immerse the product’s 

electrical components in water or other liq-

uids .

Never hold the product under running water . Wipe down 

the product with a slightly damp cloth .
Do not let any water or other liquids enter the product 

interior .
Do not use any abrasive, aggressive cleaners or hard 

brushes to clean the product .
After cleaning: Let all parts dry completely .

Cleaning the accessories

- Clean the accessories in warm, soapy water .
- After cleaning: Let all accessories dry completely .

Cleaning the cotton cover 10

The cotton cover 10 can be hand-washed in water with 

temperature up to 60 °C .
After cleaning: Let the cotton cover 10 dry completely . 

You may also use a tumble dryer at a low level (55 °C) .

Removing limescale

If the steam power reduces drastically, it may be needed 

to remove the limescale from the water tank 2 /accesso-

ries:

Water tank 2 :

•  Disconnect the power plug 7 from the mains socket .
•  Fill the water tank 2 with a mixture of tap water and 

vinegar (ratio of 2:1) .
•  Wait 24 hours .
•  Drain the mixture into a sink .
•  Flush the water tank 2 with fresh water (see “Filling 

the water tank”) .

Accessories:

•  Disconnect the power plug 7 from the mains
•  socket .
•  Fill the water tank 2 with a mixture of tap water and 

vinegar (ratio of 2:1) . Install the accessory you wish to re-

move the limescale from .
•  Secure the position of the product to ensure that the 

steam is aimed away from the surrounding objects and 

surfaces .
•  Turn on the product . Operate the product until all the 

mixture is used up .

Storage

Store the product in the original packaging when it is not 

in use .
Store the product at a dry location out of the reach of 

children .
Store the product with an emptied water tank 2 only .

WARRANTY

The product has been manufactured to strict quality 

guidelines and meticulously examined before delivery . 

In the event of product defects you have legal rights 

against the retailer of this product . Your legal rights are 

not limited in any way by our warranty detailed below .
The warranty for this product is 3 years from the date of 

purchase . Should this product show any fault in materi-

als or manufacture within 3 years from the date of pur-

chase, we will repair or replace it – at our choice – free of 

charge to you . The warranty period begins on the date 

of purchase . Please keep the original sales receipt in a 

safe location . This document is required as your proof 

of purchase . This warranty becomes void if the product 

has been damaged, or used or maintained improperly . 

The warranty applies to defects in material or manufac-

ture . This warranty does not cover product parts subject