Bort BDR-1200 - Инструкция по эксплуатации - Страница 12

12

between 50 and 60 Hz . The product adapts itself for both 

50 and 60 Hz .

CLEANING AND STORAGE

•  Always turn off the product before disconnecting it 

from the power supply .
•  Do not pull the power plug out of the electrical outlet 

by the power cord . Do not wrap the power cord around 

the product .
•  Protect the product, its power cord and power plug 

against dust, direct sunlight, dripping and splashing wa-

ter .
•  Store the product in a cool, dry place, protected from 

moisture and out of the reach of children .
•  Protect the product against heat . Do not place the 

product close to open flames or heat sources such as 

stoves or heating appliances .

Before first use

Remove all packaging materials . Check if all parts are 

complete .

ACCESSORIES AND AREAS OF APPLICATION

Accessory

Function

Puller (8)

For cleaning windows, 

mirrors, and other smooth 

surfaces .

Move the puller from top to

bottom .

Upholstery nozzle (9)

To disperse the flow of 

steam over a wider area for 

more gentle cleaning .

Cotton cover (10)

Designed to absorb excess 

moisture . The cotton cover 

also helps to prevent 

water spotting . This allows 

an effective steaming of 

fabrics and upholstery .

Extension hose (12)

Useful for hard-to-reach 

areas .

Angle nozzle (14)

For precision cleaning of 

items with hard-to-reach 

areas (faucets, sinks, etc .) .

Extension nozzle (15)

Useful for hard-to-reach 

areas .

Round brush (16)

For scrubbing especially 

tough stains . Ideal to use 

on ceramic tile, grouting, 

and other similar surfaces .

ASSEMBLY

Accessory

Assembly

Puller (8)

Fit the hooks (at the back of 

the puller 8 ) into the slots 

of the upholstery nozzle 9  .

Press the puller 8 against 

the upholstery nozzle 9 

until locked .

Upholstery nozzle (9)

Extension hose (12)

Extension nozzle (15)

Attach the intake to the 

steam outlet 1 of the 

product/extension hose 12 .

Screw in a clockwise 

direction until tight .

Хлопковый чехол (10)

Fix on the upholstery 

nozzle 9  .

Angle nozzle (14)

Round brush (16)

Attach the intake to the 

steam outlet 1 of the 

product, extension hose 12 

or extension nozzle 15 .

Dismount all the accessories in a reverse order .

Operation

Filling the water tank

DANGER! Risk of electric shock! Before filling 

the water tank 2 : Disconnect the power plug 7 

from the mains socket .

CAUTION! Fill the water tank 2 with tap water 

or distilled water without any additives . 

If your tap water is hard: Use distilled water . If your tap 

water is moderately hard: Mix distilled water and tap wa-

ter (ratio of 1:1) .

NOTES:

As long as there are steam and pressure in the water tank 

2 you cannot open the safety valve 3  . To open the water 

tank:
– Release steam or
– wait until the product has cooled down .
Do not exceed the water tank’s 2 maximum fill capacity 

of 250 ml .
Slowly open the safety valve 3 . Before fully opening, wait 

a few seconds until the steam stops hissing .
Use the measuring cup 13 and the funnel 11 to fill the 

water tank 2 through the water inlet 2  . Close the safety 

valve 3  .

TURNING ON/OFF

•  Connect the power plug 7 to a suitable mains socket . 

The power indicator 18 lights up . The product starts to 

produce steam immediately .
•  The product is ready to use when the steam indicator 

17 lights up .
•  Turning off the product: Disconnect the product from 

the mains socket .

NOTES:

The product takes around 3 minutes to preheat . The 

product has to be unplugged
– after use,
– before cleaning, and