FIRST 1000 Вт/2000 Вт FA-5565-1 White - Инструкция по эксплуатации - Страница 2

The unit will display the current Room 

temperature.

4.   And then by pressing the “ ” (1) button, the 

unit will blow the cold air.

5.   Upon pressing the “+” button, start set 

the suitable temperature (the highest 

temperature you can set until to 35°C), when 

the setted temperature is higher then room 

temperature, the unit will start one heat 

setting, and at this time one of the “ ” will 

light up. If continue pressing “+” the setted 

temperature will be even higher. The unit will 

start totally 2 heat settings.At this time the 2  

“ ” will light up.

6.  You can also press button “ ” (2) one or two 

times to get heat directly. One time pressing 

is in low heat setting, and two time pressing 

is in high heat setting. When pressing this 

button for third time, it will come back with 

only cool air blowing mode.

7.   By pressing “ ” (3), you can set the timer 

from 0-8 hours.

8.  By  pressing “ ” (4), you can make the heater 

with or without oscillation.

9.  When you want to turn off the heater, you 

can  press “ ” (1), this time the symbol “fan 

blade” will shining, and at the meaning time, 

all the heating will turn off and only fan 

blowing, after blowing 30s, the heater will 

cut off only showing the room temperature.

OSCILLATION BUTTON

This appliance also have an oscillation function.

To switch the function on, press the “ ” (4) 

switch. To stop it, press the swing switch again.

TIMER FUNCTION

This function will work in any mode.The timer 

function allows you to set the length of opera-

tion from 1 hour to 8 hours.Pressing the Timer 

button increase the length of operation by 1 

hour each times the button is pressed.Once the 

timer has been set the timer will count down 

the hours in 1hour by 1 hour ,showing on the 

display the remaining operating time until the 

heater will turn itself off.Pressing the timer but-

ton once more after the display reflects 8 hours 

will reset the heater to continuously running.

THERMOSTAT INSTRUCTIONS

1.   To adjust temperature, press the “+” to 

increase the desired temperature and “ – “ to 

decrease the desired temperature

2.   When the air temperature reaches 3 degrees 

above the set temperature, the heater will 

cut off

3.   When the air temperature drops 1 degree 

below the set temperature, the unit will 

come back on.

4.   Temperature can setting from 15 degree to 

35 degree

Remote control

1.   Remote control, please use Lithium battery 

CR2025  3 V.

2.   The remote control power button is labeled 

as  such “ ” 

3.   All the functions perfomed with the remote 

control work identically to the manual 

controls.

SECURITY SYSTEM:

•   The fan heater is equipped with overheating 

shut-off which switchs, if the temperature 

inside the appliance exceeds the normal 

running temperature heating element 

product will automatically stop working, the 

motor will continue to operate, the internal 

heat shed. This protective device applies only 

to the appliance itself and has no influence 

on room temperature regulation.

•   If overheating occurs, remove the plug 

from socket, push buttons to switch the 

convector off and let it cool down for at least 

10 minutes. Put the plug in the socket and 

switch the heater on.

•   If you still notice the same defect above 

mentioned remove the plug from socket and 

have the convector serviced by authorized 

service personal only.

MAINTENANCE:

•   The fan heater only needs regular cleaning 

on the outside.

•   Before you clean the unit, turn the switch to 

OFF. Remove the plug from socket and wait 

until the fan heater cool down.

•   Use a damp cloth to wipe the heater housing.

•   Do not use water, detergents, abrasive 

cleaning liquids or chemical agents (alcohol, 

gasoline etc.) to clean the unit.

TECHNICAL CHARACTERISTICS

220-240 V • 50 Hz • 2000 W

This marking indicates that this product 

should not be disposed with other 

household wastes throughout the EU. To 

prevent possible harm to the environment or 

human health from uncontrolled waste disposal, 

recycle it responsibly to promote the sustainable 

reuse of material resources. To return your used 

device, please use the return and collection 

3

ENGLISH

2

ENGLISH

INSTRUCTION MANUAL

This product is only suitable for well 

insulated spaces or occasional use.

•   Thank you very much for your purchase of 

our Fan heater.

•   Please read the instruction manual carefully 

and keep it for future use.

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic 

precautions should always be followed to 

reduce the risk of fire, electrical shock, burns 

and other injury, including the following:

1.   Study this instruction manual carefully 

before using the product.

2.   The device is only intended for private and 

not for any commercial use.

3.   Remove the unit from its packaging and 

check to make sure it is in good condition 

before using.

4.   Do not let children play with parts of the 

packing (such as plastic bags).

5.   Check the household voltage to ensure it 

matches the fan’s rated specification.

6.   Check the power cord and plug carefully 

before use to make sure that they are not 

damaged.

7.   Before unplugging the power cord, be sure 

to turn off the power. When touching the 

unit, be sure your hands are dry to prevent 

from electric shock.

8.   Do not use near or point the heater to 

furniture, curtains or other inflammable 

objects. Keep back of fan heater min. 15 cm 

away from walls or objects to allow free 

airflow.

9.   Do not block air intakes or exhaust in any 

manner to prevent a possible fire.

10.  Do not use or leave the fan heater 

unattended when children, old or disabled 

people are present.

11. Always unplug heater when not in use.

12.  Prevent water from getting into the housing 

of the heater during operation or in storage. 

Hazard of electric shock. Always store in dry 

area with no moisture.

13.  Do not use in places where there are gas, 

paint or other inflammable goods and 

objects

14.  This heater is not intended for use in 

bathrooms, laundry areas and similar indoor 

locations. Never locate the heater where it 

may fall into a bath tub or other bodies of 

water.

15.  Do not run the cord under carpeting. Do not 

cover cord with throw rugs, runners or the 

like. Arrange cord away from traffic area and 

where it will not be tripped over.

16.  Do not use a soft surface, like a bed, where 

openings may become blocked.

17.  Use this heater only as described in this 

manual. Any other uses not recommended 

by the manufacturer may cause fire, electric 

shock, or injury to persons and may void 

warranty.

18.  Avoid the use of an extension cord because 

the extension cord may overheat and cause a 

risk of fire.

19. Do not use outdoors.

20.  This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety.

21.  Children should be supervised to ensure that 

they do not play with the appliance.

22. This appliance heats up when in use. To 

avoid burns, do not let bare skin touch hot 

surfaces. Switch off and use handles where 

provided when moving.

CAUTIONS

•  This appliance is not a toy.

•  This appliance is for household use only.

•  Do not immerse the unit in the water.

•   To avoid the risk of fire or electric shock do 

not remove the housing by yourself.

•   Any servicing other than cleaning and user 

maintenance should be performed by an 

authorized service representative.

•   If the supply cord is damaged, it must be 

replaced by a special cord or assembly 

available from the manufacturer or its service 

agent.

•   Repair should be done by an authorized 

service personal only.

Warning: In order to avoid overheating,  

DO NOT COVER the heater
Do not use this heater in the immediate 

surroundings of a bath, a shower or a 

Swimming pool.

OPERATION 

(see picture A)

1.   Place the heater on a firm level surface

2.   Setting the master button to “off ”.plug the 

cord set into a 220-240 V~AC electrical outlet.

Turnning the master button “on” position.

3.   Turn the heater ON by pressing the ON/OFF 

main button at the back side of the heater.