BRAYER BR1602 - Инструкция по эксплуатации - Страница 12

12 EN

(1) to the position «OFF», unplug the unit and then 

disassemble it. 

• 

Wash all the removable parts which were used for 

operation with warm water and neutral detergent, 

rinse and dry.

• 

Wipe the meat grinder body with a slightly damp cloth 

and then wipe it dry. 

• 

Do not use any solvents or abrasives to clean the 

meat grinder body. 

• 

Provide that no liquid gets inside the meat grinder 

body. 

• 

After processing salty and sour products, rinse the 

removable parts of the meat grinder with water. 

• 

Vegetables with dyeing properties (such as carrots 

or beets) can stain the meat grinder parts; wipe 

the meat grinder parts with a cloth moistened 

with vegetable oil, then rinse them with a neutral 

detergent, rinse and dry. 

STORAGE 

• 

Before taking the meat grinder away for storage, 

make sure that the meat grinder body and all 

removable parts are clean and dry. 

• 

Keep the unit in a dry cool place out of reach of 

children and disabled persons. 

• 

For further information about recycling  

• 

Remove the installed attachment (14 or 15) from the 

vegetable slicer (18). 

• 

Wash all removable parts in warm water with a 

neutral detergent. Rinse and dry.

MOTOR OVERHEATING PROTECTION

• 

In case of overheating of the motor, the automatic 

thermal switch will trip and the meat grinder will 

switch off.

• 

Switch the meat grinder off by setting the operation 

mode switch (1) to the position “OFF”, and unplug 

the unit.

• 

Let the meat grinder cool down for approximately 

40-60 minutes (the cooling time of the electric motor 

depends on the room temperature).

• 

Connect the power plug to the mains socket and 

switch the meat grinder on by setting the operation 

mode switch (1) to the position “ON”. If the meat 

grinder does not switch on, it may mean that there 

are other damages in the unit. In this case apply 

to a service center for testing or repairing the meat 

grinder.

• 

To avoid the motor overheating, do not overload the 

meat grinder and do not put excessive efforts when 

pushing meat or other foodstuffs. 

CLEANING AND  CARE

• 

After the operation is finished, switch the meat 

grinder off by setting the operation mode switch