Lavor Galaxy 140 в комплекте T-Racer 8.086.0083C - Инструкция по эксплуатации - Страница 14

EN

14

directed at persons, animal, live electrical 

equipment or the machine itself.

•

 08WARNING:

 High pressure hoses, fittings 

and couplings are important for the safety 

of the machine. Use only hoses, fittings 

and couplings recommended by the 

manufacturer. (it is extremely important 

to protect these components against 

damage by avoiding their improper use and 

protecting them against bending, knocks 

and scratches).

•

 09WARNING:

 Appliances not equipped 

with A.S.S. – Automatic Stop System: must 

not be left in operation for more than 2 min-

utes with the gun released. The recycled wa-

ter heats up considerably, seriously damag-

ing the pump.

•

10WARNING:

 Appli-

ances equipped with 

A.S.S – Automatic Stop System: these appli-

ances should not be left in standby for more 

than 5 minutes.

•

 11WARNING:

 Switch the appliance off com-

pletely (master switch on (0)OFF) whenever 

it is left unattended.

•

 12WARNING: 

Every machine is tested in its 

operating conditions, so it is normal for a few 

drops of water to be left inside it.

•

 13WARNING:

 Take care not damage the 

electric cable. If the supply cord is damaged, 

it must be replaced by the manufacturer, its 

service agent or similarly qualified persons in 

order to avoid a hazard

•

 13b  WARNING: 

The power cord should not 

be used to pull or lift the machine.

•

 14WARNING:

 Appliance with fluid under 

pressure. Keep a firm hold on the gun and be 

prepared to take the kickback pressure. Only 

use the high pressure nozzle provided with 

the appliance.

•

 16WARNING:

 This appliance is not intended 

for use by persons (including children) with 

reduced physical, sensory or mental capa-

bilities, or lack of experience and knowledge, 

unless they have been given supervision or 

instruction concerning use of the appliance 

by a person responsible for their safety.

•

 17WARNING:

 Children should be super-

vised to ensure that they do not play with 

the appliance.

•

 18WARNING: 

Never start the high-pressure 

cleaner without first completely unwinding 

the high-pressure hose.

•

 19WARNING: 

When winding and unwind-

ing the pipe take care not to cause the high-

pressure cleaner to overturn.

•

 20WARNING: 

Before unwinding or winding 

the hose, switch the machine off and release 

the pressure in the hose itself (switching off).

•

 21WARNING: 

Risk of explosion — Do not 

spray flammable liquids.

•

 22WARNING: 

To ensure machine safety, use 

only original spare parts from the manufac-

turer or approved by the manufacturer.

•

 23WARNING: 

Do not direct the jet against 

yourself or others in order to clean clothes or 

foot-wear.

•

24WARNING:

 High pressure cleaners shall 

not be used by children or untrained person-

nel.

•

 WARNING:

 Water that has flown through 

backflow preventers is considered to be 

non-potable.

• 

XX WARNING: 

the machine shall be discon-

nected from its power source, by remov-

ing the plug from the socket-outlet, during 

cleaning or maintenance and when replac-

ing spare parts 

• 

XJ WARNING:

 If an extension cord is used, 

the plug and socket must be of watertight 

construction.

• 

XY WARNING:

 Inadequate extension cords 

can be dangerous.

>  SAFETY  DEVICE

•

 WARNING:

 the gun is fitted with a safety 

catch. Whenever use of the machine is inter-

rupted it is important to operate the safety 

catch to prevent accidental activation of the 

jet.

-   Safety features: gun equipped with safety 

locking device, appliance equipped with 

(Class I) overload cutout, pump equipped 

with by-pass valve or shutdown device.

-   The safety button on the gun is not there to 

lock the lever during operation, but to pre-

vent its accidental operation.

•

 WARNING: 

The appliance is equipped with 

a motor protection device: in case of device 

intervention, wait some minutes or, in alter-

native, disconnect and re-connect the prod-

uct to the electric system. In case this prob-