Lavor PRO ARIZONA 1209 LP 8.665.0101 - Инструкция по эксплуатации - Страница 17

the pump.

  8 " 3 / * / ( 

Appliances equipped 

with A.S.S – Automatic Stop System: these 
appliances should not be left in standby for 
more than 5 minutes.

8"3/*/(

 Switch the appliance off 

completely (master switch on (0)OFF) 
whenever it is left unattended.

8"3/*/(

Every machine is tested in its 

operating conditions, so it is normal for a few 
drops of water to be left inside it.

8"3/*/(

 Take care not damage the 

electric cable. If the supply cord is damaged, 
it must be replaced by the manufacturer, its 
service agent or similarly qualified persons in 
order to avoid a hazard

8"3/*/(

 Appliance with fluid under 

pressure. Keep a firm hold on the gun and be 
prepared to take the kickback pressure. Only 
use the high pressure nozzle provided with 
the appliance.

 16

8"3/*/(

 This appliance is not intended 

for use by persons (including children) 
with reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use 
of the appliance by a person responsible for 
their safety.

 17

8"3/*/(

 Children should be supervised 

to ensure that they do not play with the 
appliance.

 18

8"3/*/(

Never start the high-pressure 

cleaner without first completely unwinding 
the high-pressure hose.

 19

8"3/*/(

When winding and unwinding 

the pipe take care not to cause the high-
pressure cleaner to overturn.

 20

8"3/*/(

Before unwinding or winding 

the hose, switch the machine off and release 
the pressure in the hose itself (switching 
off ).

 21

8"3/*/(

Risk of explosion — Do not 

spray flammable liquids.

 22

8"3/*/(

To ensure machine 

safety, use only original spare parts from 
the manufacturer or approved by the 
manufacturer.

 23

8"3/*/(

Do not direct the jet against 

yourself or others in order to clean clothes or 
foot-wear.

24

8"3/*/(

High 

pressure 

cleaners 

shall not be used by children or untrained 
personnel.

8"3/*/(

:

 Water that has flown through 

backflow preventers is considered to be 
non-potable.

99 8"3/*/(

the machine shall be 

disconnected from its power source, by 
removing the plug from the socket-outlet, 
during cleaning or maintenance and when 
replacing spare parts 

9+ 8"3/*/(

 If an extension cord is used, 

the plug and socket must be of watertight 
construction.

9: 8"3/*/(

 Inadequate extension cords 

can be dangerous.

8"3/*/(

It is absolutely forbidden to 

use the machine in potentially explosive 
environments or areas.

8"3/*/(

-  NEVER EVER TOUCH THE MACHINE WITH WET 

HANDS OR BARE FEET.

-  NEVER PULL THE POWER SUPPLY CABLE OR 

MACHINE IN ORDER TO DISCONNECT THE PLUG 
FROM THE SOCKET.

-  IF  DURING  FUNCTIONING  THE  POWER SUPPLY 

RUNS  OUT,  FOR  SAFETY  REASONS,  TURN  THE 
MACHINE OFF.

 4"'&5:%&7*$&

8"3/*/(

 the gun is fitted with a safety 

catch. Whenever use of the machine is 
interrupted it is important to operate the 
safety catch to prevent accidental activation 
of the jet.

-   Safety features: gun equipped with safety 

locking device, appliance equipped with 
(Class I) overload cutout, pump equipped 
with by-pass valve or shutdown device.

-   The safety button on the gun is not there 

to lock the lever during operation, but to 
prevent its accidental operation.

8"3/*/(

The appliance is equipped 

with a motor protection device: in case of 
device intervention, wait some minutes or, 
in alternative, disconnect and re-connect 
the product to the electric system. In case 
this problem repeats again or if the product 
does not start again, take the product to the 
nearest After Sales Service Point

 45"#*-*5:

EN

17