IPC Portotecnica NEW ROYAL DSHH 3160 T 40214 IDAF - Инструкция по эксплуатации - Страница 26

English

- 26 -

IMPORTANT:

For maintenance and/or repairs, use only original spare parts which offer the greatest characteristics of quality and 

reliability.  Failure to use original spare parts frees the manufacturer from all responsibility.

TROUBLE-SHOOTING

Before carrying out any operations, disconnect the cleaner from the power 

(via the omnipolar switch or by unplugging the plug from the socket)  and water supply.

FAULTS 

When the switch is turned the cleaner 

does not start. 

No jet delivered. 

The pump turns but does not reach the 

rated pressure. 

When the lance is turned on the pres-

sure falls and rises. 

Insufficient detergent suction.

Presence of water in oil.

Water leaks from head.

CAUSES 

Faulty electric connection.

Thermal protection has tripped.

The omnipolar switch has tripped.

Faulty water circuit connection.

Clogged water filter.

Mains tap turned off.

Water intake filter blocked.

Faulty water circuit connection.

Pressure regulation valve is set at 

minimum.

Lance nozzle is worn. 

Detergent intake device on the lance is 

turned on. (DS Vers.)

Dirty or worn valves. 

The nozzle is clogged or deformed.

Insufficient supply.

No detergent in the tank.

Control on the lance not switched on.

Oil seal rings worn. 

Gaskets worn.

REMEDIES 

Check the mains voltage. 

Reset (if it trips again, apply to the 

technical service centre).

Reset (if it trips again, apply to the 

technical service centre).

Check it. 

Clean it. 

Turn it on. 

Clean it. 

Check it. 

Regulate it.

Apply to our technical service centre.

Turn it off.

Apply to our technical service centre.

Clean or consult our technical service 

centre. 

Check it.

Fill the detergent tank. 

Set the control on the lance.

Apply to our technical service centre.

Apply to our technical service centre.