IPC Portotecnica GALAX-H4 D1915 P4T400 40913 IDAC - Инструкция по эксплуатации - Страница 21

English

- 21 -

PRELIMINARY OPERATIONS

UNPACKING

After unpacking, ensure that the cleaner is undamaged.

If in doubt, do not use the machine.

Contact your dealer.

Packaging (bags, boxes, nails, etc) is potentially dangerous and 

should be kept out of reach of children. It should be disposed of 

or retained in respect of national environmental legislation.

FITTING THE SEPARATE PARTS OF THE MACHINE

All the fundamental parts and safety devices of the machine are 

assembled by the manufacturer.

For reasons of packing and transport, some secondary cleaner 

parts are supplied separately.

The  user  must  fit  these  parts  as  explained  in  the  instructions 

supplied in each assembly kit.

DATA PLATE:

The data plate bearing the main technical characteristics of your 

cleaner is located on the trolley and is always visible.

Warning

When buying your cleaner, ensure that it has an identifica

-

tion plate.  If there is no plate, inform the manufacturer and/

or the dealer immediately.  Machines without a plate must 

not be used and the manufacturer declines all responsibi

-

lity for them.  Products without a plate must  be considered 

anonymous and potentially dangerous.

INTENDED USE

This appliance is intended exclusively for cleaning machines, 

vehicles, buildings and general surfaces suitable for treatment 

with a high pressure jet of detergent solution between 25 and 

250 bar (360 - 3600 PSI).

This appliance has been designed for use with the detergents 

supplied or recommended by the manufacturer.  The use of 

other detergents or chemicals may influence the safety of the 

appliance.

This appliance must be used only for the purpose for which it 

was specifically designed.

All other uses are to be considered incorrect and therefore 

unreasonable.

Examples of unreasonable use:

-  Washing surfaces not suitable for cleaning with a high 

pressure jet.

- 

Washing people, animals, electric equipment or the machi-

ne itself.

- 

Using unsuitable detergents or chemicals.

-  Blocking the trigger (lever) of the lance in delivery posi-

tion.

The manufacturer cannot be held responsible for any damage 

due to improper, incorrect or unreasonable use. 

All high pressure washers are constructed in compliance with 

current safety standards and regulations.

FIG. 1

Warning

Do not use different fuel from that indicated on the iden

-

tification plate. 

Check  the  fuel  level  from  time  to  time  while  the  cleaner 

is operating. 

Attempting  to  use  the  cleaner  without  fuel  may  cause 

damage to the fuel pump. 

FILLING THE  FUEL TANK

Fill the tank with fuel for Diesel 

motors (fig. 1). 

!

!

FIG. 3

FIG. 2

FILLING THE  DETERGENT 

TANK

Warning

From the range of recommen-

ded products, choose the one 

most suited to the washing job 

to  be  done  (fig.  2)  and  dilute 

it with water according to the 

instructions on the pack.

Fill the detergent tank with the 

diluted product (fig. 3).

Ask your dealer for the cata-

logue of the detergents that 

can be used depending on 

the type of washing job to be 

done and the type of surface 

to be treated.

After using a detergent, the 

detergent intake circuit must 

be flushed out with clean 

water.

!

Diesel

Diesel

Diesel

Diesel

ChemicChemic

Chemical

Chemical