IPC Portotecnica Evolution X5 DS 3670 T 89839 IDAF - Инструкция по эксплуатации - Страница 20

- 20 -

English

Warning

When buying your cleaner, ensure that it has an identifica-

tion plate.  If there is no plate, inform the manufacturer and/

or the dealer immediately.  Machines without a plate must 

not be used and the manufacturer declines all responsibi-

lity for them.  Products without a plate must be considered 

anonymous and potentially dangerous.

PRELIMINARY OPERATIONS

UNPACKING

After unpacking, ensure that the cleaner is undamaged.

If in doubt, do not use the machine.

Contact your dealer.

Packaging (bags, boxes, nails, etc) is potentially dangerous and 

should be kept out of reach of children. It should be disposed of 

or retained in respect of national environmental legislation.

FITTING THE SEPARATE PARTS OF THE MACHINE

All the fundamental parts and safety devices of the machine are 

assembled by the manufacturer.

For reasons of packing and transport, some secondary cleaner 

parts are supplied separately.

The  user  must  fit  these  parts  as  explained  in  the  instructions 

supplied in each assembly kit.

DATA PLATE:

The data plate bearing the 

main technical characteristics 

of your cleaner is located on 

the trolley and is always visible 

(fig. 1).

COMMAND AND CONTROL DEVICES

Before connecting the machine to the water supply and to the 

power mains, it is essential to know the function of the cleaner's 

command and control devices.

FILLING  THE DETERGENT 

TANK

Warning

From the range of recommen-

ded products, choose the one 

most suited to the washing job 

to  be  done  (fig.  2)  and  dilute 

it with water according to the 

instructions on the pack.

Fill the detergent tank with 

the diluted product (fig. 3). 

Ask your dealer for the cata-

logue of the detergents that 

can be used depending on 

the type of washing job to be 

done and the type of surface 

to be treated.

After using a detergent, the 

detergent intake circuit must 

be flushed out with clean water 

(fig. 8).

!

!

INTENDED USE

This appliance is intended exclusively for cleaning machines, 

vehicles, buildings and general surfaces suitable for treatment 

with a high pressure jet of detergent solution  between 25 and 

250 bar (360 - 3600 PSI).

This appliance has been designed for use with the detergents 

supplied or recommended by the manufacturer.  The use of 

other detergents or chemicals may influence the safety of the 

appliance.

This appliance must be used only for the purpose for which it 

was specifically designed.

All other uses are to be considered incorrect and therefore 

unreasonable.

Examples of unreasonable use:

-  Washing surfaces not suitable for cleaning with a high 

pressure jet.

- 

Washing people, animals, electric equipment or the machi-

ne itself.

- 

Using unsuitable detergents or chemicals.

- 

Blocking the trigger (lever) of the lance in delivery position.

The manufacturer cannot be held responsible for any damage 

due to improper, incorrect or unreasonable use. As far as safety 

rules are concerned, the cleaners are manufactured according 

to the European Standard.

FIG. 1

FIG. 3

FIG. 2

Chemical

Chemical