VITEK VT-6404 - Инструкция по эксплуатации - Страница 8

    English

8

Setting the current time (Clock 
1)/date/city (setup mode 1)

1.  Press and hold the Mode button 

during three seconds to enter the 
current time setup mode (Clock 
1). Hour digits will start flashing, 
set hours using the Max/Min/+ 
button.

.  Press the Select/- button to 

confirm the selected value, and 
then use the Max/Min/+ button to 
set minutes.

.  Press the Select/- button to 

confirm the selected value, and 
then use the Max/Min/+ button to 
set the day.

.  Press the Select/- button to 

confirm the selected value, and 
then use the Max/Min/+ button to 
set the month.

5.  Press the Select/- button to 

confirm the selected value, and 
then use the Max/Min/+ button to 
set the year.

6.  Press the Select/- button to 

confirm the selected value, and 
then use the Max/Min/+ button 
to enter the city number (see 
Application 1), after it the sunrise 
and sunset time will change 
automatically.

7.  Press the Mode button to 

complete settings of the current 
mode and to transfer to the 
settings of the next mode.

Note: to switch between the 1-hour 

and -hour time formats press 
the Snooze/Light button in the 
Clock  mode.

Selecting pressure units/setting 
altitude

 (

setup mode 2

)

1. 

Press and hold the Mode button 
during three seconds to enter the 
setup mode you will hear a sound 
signal. 

.  Then press the Mode button 

once again, digits, indicating the 
altitude, will start flashing, the 
“ALTITUDE” will be displayed.

.  Use the Max/Min/+ or the Select/- 

buttons to set the required value.

.  Press the 

Alarm/Channel

/°C/°F 

button to switch between the 
pressure units: “hPa” or “mmHg”.

5.  Press the Mode button to complete 

settings of the current mode and to 
transfer to the settings of the next 
mode.

Setting indoor temperature value 
limits (

setup mode 3

)

1. 

Press and hold the Mode button 
during three seconds to enter the 
setup mode you will hear a sound 
signal. 

.  Then press the Mode button 

twice. Digits, indicating the 
indoor temperature, will start 
flashing.

6404IM.indd   8

20.08.2008   15:57:04