VITEK VT-6404 - Инструкция по эксплуатации - Страница 10

    English

10

.  Select the required remote 

sensor (1-) by using the Alarm/
Channel

/°C/°F button.

.  By pressing the 

Snooze/Light 

button, select the upper humidity 
limit ( ), the lower humidity limit 
( ) or switch off this function.

5. 

Use the Max/Min/+ or Select/- 
buttons to set the required value.

6.  Press the Mode button to 

complete settings of the current 
mode and to transfer to the 
settings of the next mode.

Note: if temperature/humidity values 

fall outside the limits, you will 
hear sound signals, the values of 
the corresponding parameters 
will be flashing. Press any key to 
switch off sound signals. 

SET TINGS IN THE Clock 2 MODE

1.  To enter the Clock  mode press 

the 

Mode button, the “

Clock 

” indication will appear on the 

display.

CLOCK 2

. 

Use the Max/Min/+ or the Select/- 
button to set the required value 
(shift against the current time, set 
in the Clock 1 mode).

Alarms setting

1.  To enter the alarm setting mode 

press the 

Mode button, the 

corresponding indications will 
appear on the display: 

 or

.

.  Set the alarm actuation hours by 

using the 

Max/Min/+ button.

. 

Set the alarm actuation minutes 
by using the

 Select/- button.

.  Set the day of the week by using 

the Snooze/Light button.

5.  To switch on the alarm press the 

Alarm/Channel

/°C/°F button, the 

“on” indication will appear on the 
display. 

To switch off the alarm press the 

Alarm/Channel

/°C/°F button once 

again, the on indication will go out.

Note: when the required time is 
reached you will hear sound signals, 
the corresponding symbols (

 or 

) 

will be flashing.

You can switch off the alarm for 8 
minutes by pressing the Snooze/Light 
button. 

To switch off the alarm press 

any key (in about one minute the 
alarm will switch off automatically).

6404IM.indd   10

20.08.2008   15:57:05