Материнские платы GIGABYTE GA MA790GP UD3H - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 39 -
BIOS Setup
2-3
MB Intelligent Tweaker(M.I.T.)
(Note) This item is present only if you install a CPU that supports this feature.
•
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
•
When the
System Voltage Optimized
item blinks in red, it is recommended that you set
the
System Voltage Control
item to
Auto
to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
Advanced Clock Calibratioin
[Press Enter]
HT Link Frequency
[Auto]
CPU Clock Ratio
[Auto]
CPU North Bridge Freq.
(
Note
)
[Auto]
CPU Host Clock Control
[Auto]
x CPU Frequency (MHz)
200
PCIE Clock (MHz)
[Auto]
VGA Core Clock control
[Disabled]
x
VGA Core Clock (Mhz)
700
Set Memory Clock
[Auto]
x Memory Clock
x3.33
677Mhz
DCTs Mode
(
Note
)
[Unganged]
DRAM Configuration
[Press Enter]
******** System Voltage Optimized ********
System Voltage Control
[ Manual]
SouthBridge Volt Control
[ N o r m a l ]
SidePort Mem Volt Control
[ N o r m a l ]
NorthBridge Volt Control
[ N o r m a l ]
DDR2 Voltage Control
[ N o r m a l ]
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
CPU NB VID Control
(
µù
)
[ N o r m a l ]
CPU Voltage Control
[ N o r m a l ]
Normal CPU Vcore
1.3500V
