GIGABYTE GA 8VM800PMD 775 - Инструкция по эксплуатации - Страница 75

Appendix

- 75 -

English

Figure 18

(Note) If you want to create a RAID array, select the item depending on the operating system that you

want to install. (Windows XP, Windows 2000 or Windows NT4). If you do not want create a
RAID array, select 

VIA ATA/ATAPI Host Controller(Windows XP)

.

Windows Setup

 ENTER=Select   F3=Exit

        You have chosen to configure a SCSI Adapter for use with Windows,
         using a device support disk provided by an adapter manufacturer.

         Select the SCSI Adapter you want from the following list, or press ESC
         to return to the previous screen.

VIA Serial ATA RAID Controller(Windows XP)
VIA Serial ATA RAID Controller(Windows 2000)
VIA Serial ATA RAID Controller(Windows NT4)
VIA ATA/ATAPI Host Controller(Windows XP)

Figure 19

Windows Setup

S=Specify Additional Device Enter=Continue   F3=Exit

    Setup will load support for the following mass storage device(s):

    VIA Serial ATA RAID Controller(Windows XP)

   * To specify additional SCSI adapters, CD-ROM drives, or special

 disk  controllers for use with Windows, including those for
 which you have a device support disk from a mass storage device
 manufacturer, press S.

   * If you do not have any device support disks from a mass storage

 device manufacturer, or do not want to specify additional
 mass storage devices for use with Windows, press ENTER.

Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 18 below
will appear. If you want to install Windows XP, use the ARROW keys to select 

VIA Serial ATA RAID

Controller(Windows XP)

(Note)

 and press ENTER

.  

Then it will begin to load the SATA driver from the

floppy disk.

Step 4:
When the screen as shown below appears, press ENTER to continue the SATA driver installation from
the floppy disk. The driver installation will be finished in about one minute.

If a message appears saying one or some file(s) cannot be found, please check the floppy
disk or copy the correct SATA driver again from the motherboard driver CD.