Материнские платы GIGABYTE GA 8I865PE TW - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
GA-8I865PE-TW Motherboard
- 40 -
English
Power Management Setup
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking
In standby mode(S1), power LED will blink. (Default value)
Dual/OFF
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-Off
Press power button then Power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 seconds to power off. Enter suspend if button is pressed
less than 4 seconds.
PME Event Wake Up
Disabled
Disable this function.
Enabled
Enable PME Event Wake up. (Default value)
ModemRingOn/WakeOnLan
Disabled
Disable Modem Ring on/wake on Lan function.
Enabled
Enable Modem Ring on/wake on Lan. (Default value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Disable this function. (Default value)
Enabled
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Everyday, 1~31
Time (hh: mm: ss) Alarm :
(0~23) : (0~59) : (0~59)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type
[S1(POS)]
Power LED in S1 state
[Blinking]
Off by Power button
[Instant-Off]
PME Event Wake Up
[Enabled]
ModemRingOn/WakeOnLan
[Enabled]
Resume by Alarm
[Disabled]
x Date (of Month) Alarm
Everyday
x Time (hh:mm:ss) Alarm
0 : 0 : 0
Power On by Mouse
[Disabled]
Power On by Keyboard
[Disabled]
x KB Power ON Password
Enter
AC BACK Function
[Soft-Off]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Save Default
F7: Optimized Defaults
Item Help
Menu Level
`
[S1(POS)]
Set suspend type to
Power On Suspend under
ACPI OS
[S3(STR)]
Set suspend type to
Suspend to RAM under
ACPI OS
