Материнские платы GIGABYTE GA 8AENXP DW - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Appendix
- 81 -
English
B. Configuring the Promise PDC20779 RAID BIOS
The Promise PDC20779 RAID BIOS setup lets you choose the RAID array type and which hard drives
you want to make part of the array.
Entering the RAID BIOS Setup
1. After rebooting your computer, wait until you see the RAID software prompting you to press Ctrl + F.
The RAID prompt appears as part of the system POST and boot process prior to loading the OS. You
have a few seconds to press <Ctrl> + <F> before the window disappears.
Press <Ctrl> + <F>. The Promise RAID Utility window appears (as Figure below).
FastTrak 779 (tm) BIOS Version 2.00.0.24
Copyright (c) 2003 Promise Technology, Inc.
Updated in 2004
No Array is defined..............................
Press <Ctrl-F> to enter FastBuild (tm) Utility or
Press [ESC] to continue booting
FastBuild (tm) 2.03 (c) 2003-2005 Promise Technology, Inc.
Auto Setup.................................................. [ 1 ]
View/Change Drives Assignments............ [ 2 ]
Define Array............................................. [ 3 ]
Delete Array............................................. [ 4 ]
Rebuild Array............................................ [ 5 ]
[
Main Menu
]
]
[
Keys Available
]
Press 1..5 to Select Option
[ESC] Exit
M a i n M e n u
This is the first option screen when you enter the FastBuild Setup.
To create a new array automatically, press <1>. Promise recommends this option for most users.
To manually create an array, press <3> to enter the
Define Array
window. If you wish to specify block
size, you must create the array manually.
To view the disk drives assigned to arrays, press <2> to enter the
View Drive Assignments
window.
To delete an array, press <4> to enter the
Delete Array
window.
To recover from an error in a mirrored (RAID 1) disk array, press <5> to enter the
Rebuild Array
window.
