Материнские платы GIGABYTE GA 8AENXP Dual Graphic - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
BIOS Setup
- 47 -
English
CPU Host Frequency(Mhz)
100Mhz ~ 600Mhz
Set CPU Host Clock from 100Mhz to 600Mhz.
If you use a 533Mhz FSB processor, please set
CPU Host Frequency
to
133Mhz
.
If you use an 800Mhz FSB processor, please set
CPU Host Frequency
to
200Mhz
.
If you use a 1066Mhz FSB processor, please set
CPU Host Frequency
to
266Mhz
.
PCI Express Frequency(Mhz)
Auto
Set PCI Express frequency automatically. (Default value)
100Mhz ~ 130Mhz
Set PCI Express frequency from 100Mhz to 130Mhz.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533Mhz,
3
Memory Frequency = Host clock x 3.
4
Memory Frequency = Host clock x 4.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800Mhz,
2.00
Memory Frequency = Host clock x 2.
2.66
Memory Frequency = Host clock x 2.66.
3.00
(Note)
Memory Frequency = Host clock x 3.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=1066Mhz,
1.5
Memory Frequency = Host clock x 1.5.
2
Memory Frequency = Host clock x 2.
2.66
(Note)
Memory Frequency = Host clock x 2.66.
3
Memory Frequency = Host clock x 3.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on
CPU Host Frequency(Mhz)
and
Memory Frequency For
setting.
DIMM OverVoltage Control
Normal
Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V ~ +0.3V Increase voltage range as user selected.
PCI-E OverVoltage Control
Normal
Set PCI-E OverVoltage Control to Normal. (Default value)
+0.1V ~ +0.3V Increase voltage range as user selected.
FSB OverVoltage Control
Normal
Set FSB OverVoltage Control to Normal. (Default value)
+0.1V ~ +0.3V Increase voltage range as user selected.
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore voltage.
(Note) To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and set
Memory
Frequency For
to
3.00
.
To use a DDRII 711 memory module on the motherboard, you must install a 1066MHz FSB processor and set
Memory
Frequency For
to
2.66
.
