Материнские платы GIGABYTE GA 78LMT S2P rev 3 1 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
- 25 -
BIOS Setup
Trfc1 for DIMM2
Options are: Auto (default), 90ns, 110ns, 160ns, 300ns, 350ns.
Write Recovery Time
Options are: Auto (default), 5T~8T, 10T, 12T.
Precharge Time
Options are: Auto (default), 4T~7T.
Row Cycle Time
Options are: Auto (default), 11T~42T.
RAS to RAS Delay
Options are: Auto (default), 4T~7T.
Channel Interleaving
Enables or disables memory channel interleaving.
Enabled
allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. (Default: Enabled)
Bank Interleaving
Enables or disables memory bank interleaving.
Enabled
allows the system to simultaneously access dif-
ferent banks of the memory to increase memory performance and stability. (Default: Enabled)
DQS Training Control
Enables or disables memory DQS training each time the system restarts. (Default: Skip DQS)
Memclock tri-stating
Determines whether to enable memory clock tri-stating in CPU C3 or Alt VID mode. (Default: Disabled)
******** System Voltage Optimized ********
System Voltage Control
Determines whether to manually set the system voltages.
Auto
lets the BIOS automatically set the
system voltages as required.
Manual
allows all voltage control items below to be configurable. (Default:
Auto)
DDR3 Voltage Control
Allows you to set memory voltage.
Normal
Supplies the memory voltage as required. (Default)
+0.100V ~ +0.300V The adjustable range is from 0.100V to 0.300V.
Note:
Increasing memory voltage may result in damage to the memory.
NorthBridge Volt Control
Allows you to set the North Bridge voltage.
Normal
Supplies the North Bridge voltage as required. (Default)
+0.1V ~ +0.3V
The adjustable range is from 0.1V to 0.3V.
SouthBridge Volt Control
Allows you to set the South Bridge voltage.
Normal
Supplies the South Bridge voltage as required. (Default)
+0.1V ~ +0.2V
The adjustable range is from 0.1 to 0.2V.
CPU NB VID Control
Allows you to set the CPU North Bridge VID voltage.
Auto
sets the CPU North Bridge VID voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
