Beurer MG315 - Инструкция по эксплуатации - Страница 16

16

  You can specify the settings as follows:

 1. 

Automatic massage programs

 Press the 

relax

, 

refresh

 or 

therapy

 button.  

 relax program:    

  A combination of swing and rolling massage massages your back and neck area.
 

 refresh program:  

  A combination of Shiatsu and rolling massage massages your back and neck area.

 therapy program:  

  A combination of Shiatsu, rolling and swing massage massages your back and neck area.

 2. 

Shiatsu back and neck massage

  Press the 

shiatsu

 button. Then use the 

full

, 

back

 or 

neck

 button to select the desired massage area.  

 3. 

Swing back and neck massage

  Press the 

swing

 button. Then use the 

full, back

 or 

neck

 button to select the desired massage area.

You can use the 

spot

 button to select a 

spot massage

, i.e. Shiatsu and swing massage without vertical 

movement. You can change the position of the spot massage by holding down one of the arrows next to 
the spot button until the desired position is reached. 

  4. Rolling massage

  Press the 

rolling

 button. Then use the 

full

, 

back

 or 

neck

 button to select the desired massage area. 

   During the rolling massage you can use the 

width

 button to select the distance between the massage 

rollers.

   If you change the massage type (Shiatsu, swing or rolling massage) the area that was previously selected 

is retained. Please note that when you change from spot Shiatsu or swing massage to rolling massage, 
you have to select the massage area again.

 Note

•  Rolling massage and spot massage cannot be selected at the same time.

  5. Heating function

  Press the 

heat

 [15] button to switch on the heating function of the massage heads. The massage heads 

light up red at this time.

•  Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device 

for longer can over-stimulate the muscles and cause tension instead of relaxation. The massage can be 
finished at any time by pressing the   button. Please note that on switching off, the massage heads first 
return to the starting position at the lumbar region. This is indicated by the LED flashing. Once this position 
is reached, the device switches off.

•  If the device is stopped be pressing a massage area button twice, it also returns to the starting position 

after 15 minutes and then switches off.

•  Do not disconnect the device from the mains supply during operation. Always switch it off first and wait 

until it has returned to the initial position.

 Note

•   The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.

8. Care and storage

Cleaning

 WARNING

•   Disconnect the device before cleaning it.
•   Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the 

device or accessories.