Beurer MG315 - Инструкция по эксплуатации - Страница 15

15

Hand switch

3

4

5

7

10

8

2

1

15

9

6

12

14

13

11

  1  Button 
  2  

timer

 button (5 – 10 – 15 minutes)

  3  

demo

 button

  4  Automatic massage programs
  5  LED display for body scanning 
  6   

Full

 button (massage for the whole back and 

neck area)

  7   

back

 button (massage for the whole back 

area)

  8  

neck

 button (massage for the neck area)

  9  

shiatsu

 button (Shiatsu massage)

10  

swing

 button (swing massage)

11  

spot

 button (spot massage)

12  height adjustment button (spot massage)
13  

rolling

 button (rolling massage)

14   

width

 button (distance between massage 

rollers)

15  

heat

 button (in-seat heating)

6. Start-up

•  Position the seat cover upright on a suitable seat with a sitting area and backrest (chair, sofa or similar). 

Make sure that the seat has a sufficiently high backrest.

• You can achieve the most comfortable massage position on a chair with an upright back.
•  Use the flexible fastening straps and hook-and-loop fasteners to secure the Shiatsu seat cover.
• Connect the device to the mains by plugging the plug into the socket.

7. Operation

Press your back against the massager in an upright posture. The upright posture is necessary to enable ac-
curate scanning of your back. The body scanning function is used for this and determines the size of the user.  
The massage must be pleasant and relaxing at all times. Stop the massage or change your position or the 
contact pressure if you find it is painful or unpleasant.
•   Do not force or jam any part of your body, in particular your fingers, between the moving massage elements 

or their holders in the device.

•  

Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads 
can move to the left and right of your spinal column.

• Switch on the massager with the   button. The body scanning LED display flashes while your back is 

being scanned. After scanning, the relax massage program is activated.

  The LEDs signal the massage functions which are currently selected. 
•  The automatic switch-off function is activated with selection of the massage region and is preset to 15 min-

utes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the 

timer

 button.

  Please note that changing the timer setting makes the timer start to count again from the beginning. To 

avoid overheating the device, select the maximum massage duration at the beginning of the massage and 
do not change it again during the massage.