Магнитолы Kenwood KDC-101 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
10
TROUBLESHOOTING
Symptom
Remedy
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“PROTECT” appears and no
operations can be done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not solve the
problem, consult your nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors.
(
➜
2)
The unit does not work at all.
Reset the unit.
(
➜
3)
• Radio reception is poor.
• Static noise while listening to
the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
“NA FILE” appears.
Make sure the disc contains supported audio files.
(
➜
9)
“NO DISC” appears.
Insert a playable disc into the loading slot.
“TOC ERROR” appears.
Make sure the disc is clean and inserted properly.
“PLS EJECT” appears.
Reset the unit. If this does not solve the problem, consult your
nearest service center.
Disc cannot be ejected.
Press and hold
0
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit.
(
➜
3)
“READ ERROR” appears.
Copy the files and folders onto the USB device again. If this does
not solve the problem, reset the USB device or use another USB
device.
“NO DEVICE” appears.
Connect a USB device, and change the source to USB again.
“COPY PRO” appears.
A copy-protected file is played.
“NO MUSIC” appears.
Connect a USB device that contains playable audio files.
“NA DEVICE” appears.
Connect a supported USB device, and check the connections.
Symptom
Remedy
“USB ERROR” appears.
• Remove the USB device, turn the unit off, then turn it on
again.
• Try to connect another USB device.
“iPod ERROR” appears.
• Reconnect the iPod.
• Reset the iPod.
Noise is generated.
Skip to another track or change the disc.
Tracks do not play back as you
have intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not correct.
This is caused by how the tracks are recorded.
The number of songs contained in
the “SONGS” category of this unit
is different from the iPod/iPhone.
Podcast files are not counted on this unit as this unit does
not support the playback of podcast files.
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers, and
a limited number of symbols. Uppercase Cyrillic letters can
also be displayed if
[RUSSIAN SET]
is set to
[ON]
.
(
➜
4)
B64-5057-10_01_KDC201_E_En.indd 10
12/12/19 9:01
