JVC KD-R807 - Инструкция по эксплуатации - Страница 39

ENGLISH

39

REFERENCES

Continued on the next page

Symptoms

Remedies/Causes

USB device

•  “Reading” keeps flashing on the display.

•  Readout time varies depending on the USB device.
•  Do not use too many hierarchy or folders.
•  Turn off the power then on again.
•  Do not pull out or connect the USB device repeatedly 

while “Reading” is displayed on the display.

•  “No File” appears on the display.

Check whether the selected folder, the connected USB 
device, or the iPod/iPhone contains a playable file.

•  “Read Failed” appears on the display.

The connected USB device is not working properly. 
Connect the USB device again.

•  Tracks/folders are not played back in the 

order you have intended.

The playback order is determined by the file name. 
Folders with numbers on the initial of their names 
are sorted in numerical order. However, folders with 
no numbers on the initial of their names are sorted 
according to the file system of the USB device.

•  “Cannot Play” appears on the display.
•  “No USB” appears on the display.
•  The unit cannot detect the USB device.

•  Check whether the connected USB device or the iPod/

iPhone is compatible with this unit.

•  The USB device is not connected properly. Connect the 

USB device again.

•  “Not Support” appears on the display and 

track skips.

Check whether the track is a playable file format.

•  Correct characters are not displayed (e.g. 

album name).

This unit can display Roman alphabets, Cyrillic alphabets, 
numbers and symbols (see page 3).

•  While playing a track, sound is sometimes 

interrupted.

The tracks have not been properly copied into the USB 
device. Copy tracks again into the USB device, and try 
again.

Bluetooth

•  The unit does not detect the Bluetooth 

device.

•  Search from the Bluetooth device again.
•  Reset the unit. When “Wait Pair” appears on the 

display, search from the Bluetooth device again.

•  The unit does not make pairing with the 

Bluetooth device.

Enter the same PIN code for both the unit and target 
device.

•  Echo or noise occurs.

Adjust the microphone units position.