JVC KD-R807 - Инструкция по эксплуатации - Страница 11

ENGLISH

11

OPERATIONS

To activate TA Standby Reception

The TP (Traffic Programme) 
indicator either lights up or 
flashes.

•  If the TP indicator lights up, TA Standby Reception is 

activated.

•  If the TP indicator flashes, TA Standby Reception is 

not yet activated. (This occurs when you are listening 
to an FM station without the Radio Data System 
signals required for TA Standby Reception.)

  To activate the reception, tune in to another station 

providing these signals. The TP indicator will stop 
flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch 
temporarily to your favorite PTY programme from any 
source other than AM and FM-LOW.

To activate and select your favorite PTY code for 
PTY Standby Reception,

 see page 27.

The PTY indicator either lights up or flashes.
•  If the PTY indicator lights up, PTY Standby Reception 

is activated.

•  If the PTY indicator flashes, PTY Standby Reception is 

not yet activated.

  To activate the reception, tune in to another station 

providing these signals. The PTY indicator will stop 
flashing and remain lit.

To deactivate the PTY Standby Reception,

 select 

<

Off

> for the PTY code (see page 27). The PTY 

indicator goes off.
•  The unit will not switch to Traffic Announcement or 

PTY programme when a call connection is established 
through “

BT FRONT/BT REAR

.”

  Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not 
sufficient enough, this unit automatically tunes in to 
another FM Radio Data System station of the same 
network, possibly broadcasting the same programme 
with stronger signals (see the illustration below).

When shipped from the factory, Network-Tracking 
Reception is activated.

To change the Network-Tracking Reception 
setting,

 see <

AF Regional

> on page 27.

Programme A broadcasting on different frequency areas 
(01 – 05)

  Automatic station selection—

Programme Search

Usually when you select a preset number, the station 
preset in that number is tuned in.
If the signals from the FM Radio Data System preset 
station are not sufficient for good reception, this 
unit, using the AF data, tunes in to another frequency 
possibly broadcasting the same programme as the 
original preset station is broadcasting.
•  The unit takes some time to tune in to another 

station using programme search.

•  See also page 27.