JVC KD-R807 - Инструкция по эксплуатации - Страница 34

ENGLISH

34

•  Depending on the shape of the USB devices and 

connection ports, some USB devices may not be 
attached properly or the connection might be loose.

•  When connecting a USB mass storage class device, 

refer also to its instructions.

•  This unit may not work properly with some USB hub 

or USB card reader.

•  This unit is compatible with the USB Full-Speed.
•  If the connected USB device does not have the correct 

files, “No File” appears.

•  This unit can show ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, 

or 2.4) for MP3 and WMA/WAV Tag.

•  This unit can play back MP3/WMA/WAV files meeting 

the conditions below:

  MP3:
  –  Bit rate: 32 kbps — 320 kbps (MPEG-1)
     

8 kbps — 160 kbps (MPEG-2)

  – Sampling frequency:
    48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
    24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
  WMA:
  –  Bit rate: 5 kbps — 320 kbps
  –  Sampling frequency: 8 kHz — 48 kHz
  –  Channel: 1 ch/2 ch
  WAV:
  –  Bit rate: Linear PCM at 705 kbps and 1 411 kbps
  –  Sampling frequency: 44.1 kHz
  –  Channel: 1 ch/2 ch
•  This unit can play back MP3 files recorded in VBR 

(variable bit rate).

•  The maximum number of characters for folder and 

file names is 25 characters (including <.mp3>, 
<.wma>, <.wav>); 128 characters for MP3/WMA/
WAV Tag.

•  This unit can recognize a total of 20 000 files and 

2 000 folders (999 files per folder). However, the 
display can shows until 999 folders/files.

•  The unit cannot recognize a USB mass storage class 

device whose rating is other than 5 V and exceeds 
500 mA.

•  USB devices equipped with special functions such as 

data security functions cannot be used with the unit.

•  Do not use a USB device with 2 or more partitions.
•  When connecting with a USB cable, use the USB 2.0 

cable.

•  This unit may not recognized some of the USB device 

connected through a USB card reader.

•  This unit may not play back files in a USB device 

properly when using a USB extension cord.

•  This unit cannot assure proper functions or supply 

power to all types of USB devices. 

  Bluetooth operations

General

•  While driving, do not perform complicated operation 

such as dialing the numbers, using phone book, etc.

  When you perform these operations, stop your car in 

a safe place.

•  Some Bluetooth devices may not be connected to 

this unit depending on the Bluetooth version of the 
device.

•  If you connect a different USB Bluetooth Adapter, 

all the registered devices and information will be 
cleared.

•  This unit may not work for some Bluetooth devices.
•  Connecting condition may vary depending on the 

circumstances around you.

•  If you turn off the unit, detach the control panel, or 

unplug the USB Bluetooth Adapter during a phone 
call conversation, the Bluetooth connection is 
disconnected. Continue the conversation using your 
cellular phone.

•  When the unit is turned off, the device is 

disconnected.