JVC KD-R807 - Инструкция по эксплуатации - Страница 16

ENGLISH

16

Pairing and PIN code

When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your Bluetooth 
device you want to connect.
•  Once the connection is established, it is registered in 

the unit even if you reset the unit. Up to five devices 
can be registered in total.

•  Only one device for Bluetooth phone and one for 

Bluetooth audio can be connected at a time.

1

  Select <New Pairing>.

2

  Enter a PIN (Personal Identification Number) 

code to the unit.

•  You can enter any number you like (1-digit to 

16-digit number). [Initial: 0000]

  –  Some devices have their own PIN code. Enter 

the specified PIN code to the unit.

1

  Move to the next (or previous) number 

position.

2

  Select a number.

3

  Repeat steps 

1

 and 

2

 until you finish 

entering a PIN code.

4

  Confirm the entry.

“Wait Pair” appears on the display.

3

  Use the Bluetooth device to search and 

connect.

On the device to be connected, enter the same PIN 
code you have just entered for this unit.

“Wait Pair” appears, then “Pairing OK” or 
“Connected [Device Name]” appears on the display 
when the connection is established. Now you can 
use the device through the unit.

 appears when Bluetooth connection is 

established.

The device remains registered even after you 
disconnect the device. Use <

Connect Phone

> or 

<

Connect Audio

> (or activate <

Auto Connect

>) 

to connect the same device from next time on. (See 
page 30.)

Deleting a registered device

1

  Select <Delete Pairing>.

2

  Select a device you want to delete.

“Delete OK?” appears on the display.

3

  Delete the selection.

“OK” appears on the display when the device is 
deleted.

•  To return to the previous menu, press BACK.

[Turn]

=

[Press]

[Turn]

=

[Press]

[Turn]

=

[Press]