JVC KD-AVX20 - Инструкция по эксплуатации - Страница 68

ENGLISH

68

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
•  For operations with the external components, refer also to the instructions supplied with the adapters used for the 

connections (as well as the instructions supplied with the external components).

•  Messages (enclosed in “ ”) in the tables below are shown in the language selected on <Language>. (

☞

 page 53) 

Messages described here are in the language of this manual.

Symptoms

Remedies/Causes

General

•  No sound comes out of the speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  The monitor is not clear and legible.

Sunshine from the windscreen may cause this symptom.
Adjust <Bright>. (

☞

 page 53)

•  The unit does not work at all.

Reset the unit. (

☞

 page 3)

•  “No Signal” appears.

•  Change the source.
•  Start the playback on the external component connected 

to VIDEO IN plug.

•  Check the cords and connections.
•  Signal input is too weak.

•  “Mecha Error Push Reset” appears on the 

monitor, and the control panel does not 
move.

Reset the unit. (

☞

 page 3)

•  The touch pad controls do not respond 

properly.

•  <Illumination> function does not work 

properly.

•  Keep your hands and controls clean and dry.
•  Eliminate static electricity and do not place magnetic 

items near the unit.

•  Leave the unit until the temperature becomes stable in 

the car.

•  A rubber mat on the floor may cause this symptom. In 

this case, do not use the rubber mat.

FM/AM

•  SSM automatic presetting does not work.

Store stations manually. (

☞

 page 14)

•  Static noise while listening to the radio.

Connect the aerial firmly.

Disc playback

•  Disc can be neither recognized nor played .

Eject the disc forcibly. (

☞

 page 3)

•  Disc cannot be ejected.

Unlock the disc. (

☞

 page 22)

•  Recordable/Rewritable discs cannot be 

played back.

•  Tracks on the Recordable/Rewritable discs 

cannot be skipped.

•  Insert a finalized disc.
•  Finalize the discs with the component which you used 

for recording.