JVC KD-AVX20 - Инструкция по эксплуатации - Страница 57

SETTINGS

57

ENGLISH

 Equalizer

Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3

,

☞

 [50]

 Sound

Menu items

Selectable settings, [reference page]

Fader/Balance

Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (

00

).

Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only

Volume Adjust

Adjust and store auto-adjustment volume level for each source, comparing to 
the FM volume level. The volume level will automatically increase or decrease 
when you change the source.

–12

 to 

+12

; Initial 

00

•  For digital sources: You can make the adjustments separately depending on 

the audio format—Dolby Digital and the others.

Subwoofer Level

Adjust the subwoofer output level.

–06

 to 

+08

; Initial 

00

High Pass Filter

Through:

 Select when the subwoofer is not connected.

On:

 Select when the subwoofer is connected.

Crossover

Adjust the crossover frequency between the front/rear speakers and the 
subwoofer.

80Hz, 120Hz, 150Hz

Amplifier Gain

You can change the maximum volume level of this unit.

Off:

 Deactivates the built-in amplifier.

Low Power:

 Select this if the maximum power of the speakers is less than 

50 W.

High Power

*

1

  Not selectable when “AV Input” is selected as the source.

*

2

  The REVERSE GEAR SIGNAL lead connection is required 

☞

 “Installation/Connection Manual.” The rear view through 

the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you shift the 
gear to the reverse (R) position.

*

3

  Not selectable when the component connected to the CD changer jack is selected as the source.

*

4

  The name of the component detected through the CD changer jack is shown.

*

5

  The TEL MUTING lead connection is required. 

☞

 “Installation/Connection Manual.“

Adjusts fader

Adjust balance