JVC KD-AVX20 - Инструкция по эксплуатации - Страница 63

63

REFERENCES

ENGLISH

 Bluetooth operations (KD-AVX40 only)

General

•  While driving, do not perform complicated operation 

such as dialing the numbers, using phone book, etc. 
When you perform these operations, stop your car in 
a safe place.

•  Some Bluetooth devices may not be connected to 

this unit depending on the Bluetooth version of the 
device.

•  This unit may not work for some Bluetooth devices.
•  Connecting condition may vary depending on 

circumstances around you.

•  When the unit is turned off, the device is 

disconnected.

Warning messages for Bluetooth operations

Connection Error:

The device is registered but the connection has failed. 
Use <Phone Connect>/<Audio Connect> to connect 
the device again. (

☞

 page 34)

Error:

Try the operation again. If “Error” appears again, check 
if the device supports the function you have tried.

Please Wait...:

The unit is preparing to use the Bluetooth function. If 
the message does not disappear, turn off and turn on 
the unit, then connect the device again (or reset the 
unit).

Icons for phone types

•  These icons indicate the phone type set on the device.

Cellular phone

Household phone

Office

General

Other than above

 USB

•  If “No USB device“ appears after removing a device, 

reattach a device or select another playback source.

•  When the USB device has no playable files, or has not 

been formatted correctly, “Cannot play this device 
Check the device” appears on the monitor.

•  The unit cannot recognize a USB device whose rating 

is other than 5 V and exceeds 500 mA.

•  While playing from a USB device, the playback order 

may differ from other players.

•  This unit may be unable to play back some USB 

devices or some files due to their characteristics or 
recording conditions.

•  USB devices equipped with special functions such as 

data security functions cannot be used with the unit.

•  Do not use a USB device with 2 or more partitions.
•  Depending on the shape of the USB devices and 

connection ports, some USB devices may not be 
attached properly or the connection might be loose.

•  When connecting a USB device, refer also to its 

instructions.

•  Connect only one USB device to the unit at a time. Do 

not use a USB hub.

•  This unit may not recognize a memory card inserted 

into the USB card reader.

•  When connecting with a USB cable, use the USB 2.0 

cable.

•  This unit may not play back files in a USB device 

properly when using a USB extension cord.

•  This unit cannot assure proper functions or supply 

power to all types of the devices. 

•  This unit can recognize a total of 5 000 files and 250 

folders (a maximum of 999 files per folder).

•  This unit can recognize a total of 25 characters for 

file/folder names.

•  For MPEG1/2 files: The maximum bit rate for video 

signals (average) is 2 Mbps.