JVC KD-AVX20 - Инструкция по эксплуатации - Страница 36

36

ENGLISH

When a call comes in...

The source is automatically changed to “Bluetooth.”

When <Auto Answer> is activated...

The unit answers the incoming calls automatically. 
(

☞

 page 59)

•  When <Auto Answer> is deactivated, press 

SRC

or touch any control to answer the incoming call.

To end the call or reject an incoming call

Hold 

SRC

 or any control.

Answering a waiting call

If your cellular phone is equipped with the call 
waiting function, you can put the current call on 
hold and answer the waiting call.
Press 

SRC

 or touch any control.

•  To restore the on-hold call, press 

SRC

 or touch 

any control again.

•  When you end one call, you can connect to the 

other.

When an SMS comes in...

If the cellular phone is compatible with SMS 
(Short Message Service) and <SMS Notify> is 
set to <On> (

☞

 page 59), the unit rings and 

“Receiving Message” appears on the monitor to 
inform you of the arrival of the message.

Name and phone number 
(if acquired)

You can also enter 

<Dial Menu>

 by pressing 

on the remote controller then touching 

6

 on 

the unit.

*1

  Displays only when the dialed or received number has 

been made through the unit.

*2

 For copying, 

☞

 page 37.

*3

 For presetting, 

☞

 page 38.

4

  Select the method to make a call.

Redial

*

1

Shows the list of phone numbers you have dialed. 

=

 Go to the following step.

Received Calls

*

1

Shows the list of the received calls. 

=

 Go to the 

following step.

Phonebook

*

2

Shows the phone book copied from a cellular 
phone. 

=

 Go to the following step.

Preset Calls

*

3

Shows the list of preset numbers. 

=

 Go to the 

following step.

Phone Number

Shows the phone number entry screen. 

=

 “How 

to enter a phone number” 

☞

 page 37

Voice Dialing

(Only when the connected cellular phone has the 
voice recognition system) 

=

 Speak the name 

you want to call. (Refer to the instruction manual 
supplied with your cellular phone.)
•  To cancel, hold 

SRC

 or any control.

5

  Select the name/phone number/preset number 

you want to call.

•  When the sound is stopped or interrupted during the 

use of a Bluetooth device, turn off, then turn on the 
unit.
–  If the sound is not yet restored, connect the 

device again. (

☞

 “Connecting/disconnecting a 

registered device” on page 34)

•  While talking, you can enter 

<MIC Setting>

 to adjust 

the microphone volume level by touching 

MENU

. (

☞

page 59)