Hyundai Electronics H-CMD2009 - Инструкция по эксплуатации - Страница 16

16

Operation

page (Auto Program or Manual Program) 
press UP/DOWN cursor buttons on the RC or 
touch these items on the screen. To enter the 
selected page press ENTER button on the RC. 
Press UP/DOWN cursor buttons on the RC or 
touch the needed item on the screen to select 
an item, and then press ENTER button on the 
RC or press the item on the screen to adjust 
the setting. Touch BACK item on the screen or 
press 

 button on the RC or panel to return to 

last settings list.

AUTO PROGRAM
•  System: select TV system (SECAM/PAL).
•  Audio: select sound system (DK/BG/I).
•  Search: select to start automatical search 

and storing of TV channels.

MANUAL PROGRAM
•  Storage: select the storage number of the 

channel.

•  System: select TV system (SECAM/PAL).
•  Audio: select sound system (DK/BG/I).
•  Channel: Select the number of the channel.
•  Fine: perform fine tuning of picture quality.
•  Memory: select on (memorize the found 

channel) or off (not memorize).

Disc/USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 1.1. Capacity: up to 8 

Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. 
Capacity: up to 8 Gb.

Insert/Eject disc

•  Insert a disc into the disc slot with label 

side up. The disc will be automatically loaded 
into the unit. The first file in the root folder will 
be played.

•  Press EJECT button to eject the disc from 

the slot. If the disc is not removed from the slot 
within several seconds, it will be automatically 

available in you area, the following service is 
not available.

AF (Alternative frequencies) function

Briefly press AF button on the RC to enable 

AF function. When the radio signal strength is 
poor, enabling the AF function will allow the unit 
to automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Touch TA button on the screen to switch on 

the TA function. When TA is on, the TA displays 
on TFT, or else, if there is no TP information, 
the mode will search TP station automatically. 
When TA is playing, the volume will be adjusted 
to a TA level automatically. When other modes 
are activated (such as DVD, AUX), if a TA 
program is played the mode will skip to the 
RDS mode automatically. It will resume to the 
primary mode after the TA is over.

Program type (PTY)

Briefly press PTY button on the RC to 

activate PTY function. When PTY is on, you 
can press UP/DOWN cursor buttons or number 
buttons on the RC to select a program type 
to search the special program. When PTY 
info is available, press OSD button on the RC 
to display such information. If PTY is off, the 
searching is stopped.

TV tuner operation

•  Connect a TV antenna to the TV antenna 

jack of the unit. Select TV mode.

•  To access the TV mode menu, press 

MODE button on front panel or remote to 
select TV mode or tap TV icon on main menu 
screen to enter TV mode, then press 

button on the RC or panel. To select a menu