Hyundai Electronics H-CMD2000 - Инструкция по эксплуатации - Страница 15

15

Operation

 or   button on the RC to enable manual 

frequency adjustment.

How to save and call stations

After the needed station is found, press and 

hold a number button (1-6) on the RC to save 
the station under corresponding number. To call 
a saved station, press corresponding number 
button on the RC. To go to previous or next 
saved station, press  /  buttons on the RC.

RDS basics

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

AF (Alternative Frequencies) 

function

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

Source menu => SETTING menu => RDS 

Setting menu => AF ON/OFF.

  AF indicator on LCD will flash until RDS 

information is received. If RDS service is not 
available in your area, turn off the AF mode.

TA mode

Some RDS FM stations periodically provide 

traffic information.

TP (Traffic Program Identification)

Broadcasting of traffic information.

TA (Traffic Announcements Identification)

Radio announcements on traffic conditions.

Source menu => SETTING menu => RDS 

Setting menu => TA ON/OFF.

When TA mode is turned on, the TA indicator 

will blink. When traffic announcement is received, 
the TA indicator will display. The unit will 
temporarily switch to the tuner mode (regardless 
of the current mode) and begin broadcasting 
the announcement at TA volume level. After 
the traffic announcement is over, it will return to 

the previous mode and volume level. When TA 
is turned on, SEEK, SCAN, AMS function can 
only be received or saved when traffic program 
identification (TP) code is received.

TA Seek/TA Alarm

Source menu => SETTING menu => RDS 

Setting menu => TA SEEK/ALARM.

If the TA (Traffic Announcements) is turned 

on and there is no traffic program identification 
code received in the specified time, no TA/TP 
will display and either TA ALARM or TA SEEK 
will be activated.

TA ALARM mode: Alarm is turned on.
TA SEEK mode: TA SEEK is automatically 

activated.

TA VOL

Source menu => SETTING menu => RDS 

Setting menu => TA VOL. Set the default 
volume of traffic anncouncements. 

RETUNE mode

Source menu => SETTING menu => RDS 

Setting menu => RETUNE L/S.

RETUNE-S or RETUNE-L is time length 

selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK retune interval 
is 45 seconds. RETUNE-L: Long, TA SEEK 
retune interval is 180 seconds.

  RETUNE mode functions for TA during 

TA SEEK mode only.

REG mode

Source menu => SETTING menu => RDS 

Setting menu => REG ON/OFF.

REG ON: AF function will implement the 

regional code (of the PI) and only stations in 
the current region can be tuned automatically.

REG OFF: AF function will ignore the 

regional code (of the PI) and stations in the 
other regions can also be tuned automatically.

EON (Enhanced Other Networks)

When EON data is received, the EON 

indicator lights and the TA and AF functions