Hyundai Electronics H-CMD2000 - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

General operations

Touch screen

Due to the touch screen, you can fulfill most 

functions not only by pressing buttons but also 
by touching the options you desired.

Turn on/off the power

Press POWER button to turn on the unit. 

The unit goes back to the last status after 
power on. When on, press POWER button to 
turn off the unit.

Mute

Press to cut the sound. Pressing again or 

adjusting volume will release muting. MUTE 
appears on the TFT during muting.

Adjust the volume

Press VOL+/- buttons to increase or 

decrease the volume level.The adjustable 
range of volume is 0 to 39.

Playing source selection

Method 1: Press SRC button on the panel or 

the RC to cycle through the available sources.

Method 2: Open the ‘SOURCE MENU’ by 

touching the top left corner of the TFT or by 
pressing MODE button on the RC, and then 
touch the option you need or select the option 
by moving the cursor and then confirm. 

  •  When some devices are not ready, 

they cannot be selected.

•  You should stop switching when the playing 

source you desired has been selected and wait 
for some seconds, the unit enters the playing 
mode you have selected.

Panel tilt

Press TILT UP/DOWN buttons on the RC 

to adjust the tilt angle of the front panel. Press 
and hold OPEN/CLOSE button on the panel 
to access to touchable menu for panel control. 
Touch the corresponding item to open/close the 
panel, to adjust its tilt angle or to eject the disc.

TFT dimming

Press DIM button on the front panel to dim 

the screen. Press the button again to resume 
image.

Steering wheel control

Source menu => SETTING menu => SWC 

Setting menu

1. At SWC menu, use  /  cursor buttons to 

select a function, then press and hold a button 
on the steering wheel (if your steering wheel 
supports the function) until the item on the 
screen is lighted. Now the function is saved in 
the button.

2. Repeat step 1 to set functions of other 

steering wheel buttons.

3. Exit the setting menu and you can operate 

the player by the buttons on the steering wheel.

4. If you want to change the setting, enter 

the SWC setting menu, select a function on the 
screen, press and hold a button on the steering 
wheel more than 2 seconds, then the function 
is saved into the button on steering wheel. At 
the same time, all other steering wheel settings 
are clear, you must reset them.

System setup

Sound Effect and TFT Setup
Touch SEL on the TFT, or press SEL button 

on the RC to enter SELECT menu. In the menu 
you can adjust audio/video settings by directly 
touching them or by pressing cursor buttons on 
the RC:

•  Audio: EQ sound effect (Flat - Pop - Rock 

- Clas. - OFF)/BASS/TREBLE/BALANCE/
FADER.

•  Video: BRIGHTNESS/CONTRAST/

COLOR/DIM.

SETUP Menu
Source menu => Setting menu => Setup 

menu

Touch the up/down icon to access next/

previous parameter list. Touch the adjust icon 
on left or right to adjust the parameter or select 
the option.