Hyundai Electronics H-CDM8017G - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

of PI code is ignored when AF switching or 
PI SEEK is implemented. (PI CODE and 
COVERAGE AREA is not checked when AF 
CHECK in progress)

TA (Traffic Alarm) function

Press TA button to turn TA function on or off.
In TA mode traffic program will be 

automatically searched, until the program 
is received. When traffic announcement is 
received the unit will temporarily switch to the 
tuner mode (regardless of the current mode) 
and begin broadcasting the announcement. 
After the traffic announcement is over, it will 
return to the previous mode and volume level. 
To interrupt traffic announcement press TA 
button shortly; it will not switch off the TA mode.

PTY (Program Type)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program.

Press PTY button to show the music type. 

Then press 1 - 6 number buttons to choose 
different music programs available.

Press PTY button twice to show the speech 

type program. Then press 1 - 6 number buttons 
to choose different speech programs. Each 
number button will show 3 different speech 
programs for you to choose (see table below).

Button

Music group

Speech group

1

Pop, Rock

News, Affairs, 

Info

2

Easy, Light

Sport, Educate, 

Drama

3

Classics

Culture, Science, 

Varied

4

Jazz, Country

Weather, 

Finance, Children

5

Nation, Oldies

Social, Religion, 

Phone IN

6

Folk

Travel, Leisure, 

Document

When PTY is selected, the radio starts to 

search corresponding PTY information, and 
stops if the corresponding PTY information 
is detected. If no buttons are pressed within 
several seconds, previously selected PTY is 
searched. During 1 loop, if desired PTY is not 
found, the unit will return to previous mode. 
Press PTY button for the 3rd time to switch the 
PTY function off.

Local/distant stations

Press TA button for several seconds, to select 

EON ТА LOCAL/EON TA DISTANCE mode. 
If you want to receive information from local 
stations only, select EON ТА LOCAL mode. 
Otherwise, select EON TA DISTANCE mode.

Other parameter setting

To choose the corresponding parameter, 

press and hold SEL button, then press it 
repeatedly until the display shows the needed 
parameter. Turn VOL knob to choose the 
needed value. After choosing, please leave the 
unit idle to activate.

TA SEEK/TA ALARM
When newly tuned station does not receive 

TP information for 5 seconds, the radio 
retunes to next station which has not the same 
station (PI – Program Information) as the last 
station, but has the TP information. When TP 
information gets lost at the current station for 
retune time which is set by RETUNE SHORT 
(30 seconds) or RETUNE LONG (90 seconds), 
the radio starts to retune to next same PI 
station. When same PI station does not catch in 
1 cyclic search, the radio retunes to next station 
with TP information. In TA SEEK mode, the 
unit will seek for traffic announcement program 
when TA button is pressed; in TA ALARM the 
unit does not retune to TA information.

PI SOUND/MUTE
Choose PI sound or mute. PI sound refers to 

the reception noise when the AF function tries 
to scan alternative frequency.

RETUNE S/L - SHORT/LONG
“RETUNE” refers to the time period the 

unit allows for radio scan when reception is