Hyundai Electronics H-CDM8017G - Инструкция по эксплуатации - Страница 10

10

Operation

General operations

Turning on/off

Press any button (except OPEN) or insert 

disc to switch the unit on. Press POWER 
button to switch the unit off.

Volume control

Rotate VOL knob on the front panel to adjust 

volume level.

Audio parameter setting

Press SEL button shortly and repeatedly to 

select a mode: VOL (volume) => BAS (bass) => 
TRB (treble) => BAL L-R (balance) => FAD F-R 
(fader). Rotate VOL knob to adjust each mode.

Caution

: In each mode, the waiting time is 

several seconds, and when the waiting time is 
over, it returns to the last display mode of radio 
or disc playback mode.

Mode selection

Press MODE button to choose a sound 

source: RADIO => AUX => CD => SD/MMC 
=> USB.

Mute function

Press MUTE button to disable the sound. 

Press the button again or adjust the volume to 
resume the sound output.

Equalizer

Press and hold MUTE button repeatedly to 

select an equalizer mode: FLAT - CLASSICS - 
POP - ROCK - OFF.

Loudness control

Press and hold BAND button; LOUD ON 

will be displayed meaning that bass output 
emphasize function is activated. To deactivate 
the function press and hold the button again.

Information display

Press DISP button to operate as the 

conversion of each display mode as follows:

- In case of receiving a RDS station
In radio mode: PS -> CT -> FREQ -> P TY
In CD mode: CD -> CT -> (ID3 TAG) -> PS 

-> FREQ -> PTY

  In case of no receiving CT or PTY 

Information, the display shows as “NO CLOCK” 
or “NO PTY”.

 - In case of receiving a non RDS station
In radio mode: “NO CLOCK” -> FREQ-> “NO 

PTY”

In CD mode: CD -> “NO CLOCK” -> FREQ 

-> “NO PTY”

Each displaying time is several seconds, and 

come back to 1’st position after several seconds.

 CT = clock time; FREQ = frequency.

BEEP function

Press and hold SEL button; then press it 

repeatedly until BEEP OFF (BEEP ALL/BEEP 
2ND) is displayed. Rotate VOL knob to select 
one of the following:

BEEP OFF – beep sound is not heard when 

a button is pressed

BEEP ALL – beep sound is heard when a 

button is pressed

BEEP 2ND – beep sound is not heard only 

when a button is pressed and held.

TEL mute

The audio system automatically mutes 

whenever a call comes in.

 This function will not work if a cable is 

not connected to the car phone.

•  When a call comes in. When a call is 

received, “TEL CALL” is displayed and all the 
unit functions are temporarily interrupted.

•  When the call ends, hang up the phone; 

“TEL CALL” disappears from the display. The 
original source (used before the phone call) is 
returned automatically and the volume restored 
gradually.

Reset function

RESET button is pressed with either a ballpoint 

pen or thin metal object. RESET function is to be 
activated for the following reasons:

•  Initial installation of the unit when all wiring