Hyundai Electronics H-CCR8188M - Инструкция по эксплуатации - Страница 13

Operation

13

UP/DOWN cursor buttons on the RC 
to select ST ON or ST OFF. ST ON 
means stereo reception of the signal; 
ST OFF means mono reception mode. 
Improvement of reception of distant 
stations can be done by selecting 
mono mode, which may cut down 
some reception noise.

Local radio station search

Press LIST button twice to show 

the function list; rotate VOLUME knob 
on the panel or press UP/DOWN 
cursor buttons on the RC to select 
LOC option. Press SELECT button, 
then rotate VOLUME knob on the 
panel or press UP/DOWN cursor 
buttons on the RC to select LOC ON 
or LOC OFF. LOC ON means that 
only local stations are received; LOC 
OFF means that both local and distant 
stations with weak and strong signal 
are received.

RDS function

RDS (Radio Data System) service 

availability varies with areas. Please 
understand if RDS service is not 
available in you area, the following 
service is not available, either.

AF (Alternative Frequencies) 

function

Press LIST button twice to show the 

function list; rotate VOLUME knob on 
the panel or press UP/DOWN cursor 
buttons on the RC to select AF option. 
Press SELECT button, then rotate 
VOLUME knob on the panel or press 
UP/DOWN cursor buttons on the RC 
to select AF ON or AF OFF.

When the function is on, AF symbol 

will blink on the display.

When the radio signal strength is 

poor, enabling the AF function will 
allow the unit to automatically search 
another station with the same PI 
(Program Identification) as the current 
station but with a stronger signal, 
so that you do not have to retune 
the stations when driving between 
different transmitter coverage areas.

PS (Program Service name): the 

name of station will be display instead 
of frequency.

If RDS service is not available in 

your area, turn off the AF mode.

TA (Traffic Alarm) function

Press LIST button twice to show the 

function list; rotate VOLUME knob on 
the panel or press UP/DOWN cursor 
buttons on the RC to select TA option. 
Press SELECT button, then rotate 
VOLUME knob on the panel or press 
UP/DOWN cursor buttons on the RC 
to select TA ON or TA OFF.

When TA is on, the TA symbol will 

show on the display.

In TA mode traffic program will 

be automatically searched, until the 
program is received. When traffic 
announcement is received the unit 
will temporarily switch to the tuner 
mode (regardless of the current 
mode) and begin broadcasting the 
announcement. After the traffic 
announcement is over, it will return to 
the previous mode and volume level.

PTY (Program Type)

Press LIST button twice to show the 

function list; rotate VOLUME knob on 
the panel or press UP/DOWN cursor 
buttons on the RC to select PTY 
option. Press SELECT button, then