Hyundai Electronics H-CCR8188M - Инструкция по эксплуатации - Страница 12

Operation

12

Radio operations

Band select

In Radio mode press BND/TYPE 

button to select a radio band: FM-1, 
FM-2, FM-3, AM-1 (MW1), AM-2 
(MW2). In each set of the bands you 
can store up to 6 preset stations, total 
30 preset memory stations.

Auto/Manual tuning

•  Manual tuning: Press and hold 

 or   button on the panel until the 

screen shows MANU SEEK. Press 
these buttons repeatedly to manually 
adjust the radio frequency. Or press 
repeatedly shortly 

 or 

 button 

on the RC to manually adjust the radio 
frequency.

•  Auto tuning: Press shortly   or 

 button on the panel or press and 

hold 

 or 

 button on the RC the 

radio will seek to the next up or down 
strong and clear frequency station 
automatically. Repeat this action to 
seek for other desired stations. To 
stop automatic search, press one of 
these buttons.

Automatic store/preset scan

•  Automatic store: Press and hold 

APS/

 button on the panel or APS/

RPT button on the RC. The radio will 
automatically store the 6 strongest 
available stations in each subband of 
the current band (FM or AM). To stop 
auto store, press this button again.

•  Preset scan: Press APS/

button on the panel or APS/RPT 
button on the RC. The receiver 
will scan the saved stations in all 
subbands of the current band for 

several seconds.

Programming tuner stations

•  Press LIST button on the panel 

once to show the preset list; rotate 
VOLUME knob on the panel or press 
UP/DOWN cursor buttons to select 
a preset station and press SELECT 
button to confirm selection. After 
choosing a preset station, you can 
adjust the frequency as described 
above in “Auto/Manual tuning” and 
save it by pressing and holding 
SELECT button on the panel. Or, you 
can select a station in the list after 
adjustment and save it by pressing 
and holding SELECT button; the 
previous station will be substituted by 
the new one.

•  To store a station, select the 

desired band and station. Press and 
hold the desired number button for 
more than 2 seconds. When stored, 
the preset number will appear on 
the display. The station can be 
recalled anytime by pressing the 
corresponding number button.

•  To call a saved station, press 

corresponding number button on the 
RC. To save the current frequency 
in a memory position, press and 
hold a number button on the RC 
corresponding to the needed memory 
position.

Mono/Stereo control (in FM 

radio mode)

Press LIST button twice to show the 

function list; rotate VOLUME knob on 
the panel or press UP/DOWN cursor 
buttons on the RC to select ST option. 
Press SELECT button, then rotate 
VOLUME knob on the panel or press