Hyundai Electronics H-CCR8188M - Инструкция по эксплуатации - Страница 10

Operation

10

General operations

Turning the unit on/off

Press PWR/TFT OFF button on the 

panel or   button on the RC to turn 
the unit on. Press and hold the button 
to turn the unit off.

Reset the unit

Operating the unit for the first time 

or after replacing the car battery, you 
must reset the unit. Press RESET 
button (hole) with a pointed object 
(such as a ballpoint pen) to set the 
unit to initial state.

  When some errors occur, 

you can also press RESET button to 
resume to normal, and it will erase 
clock setting and some memorized 
functions.

TFT display on/off

When the unit is on, press PWR/

TFT OFF button on the panel to switch 
off the display. When the display is off, 
the video out signal will be available 
so that the connected monitor will 
show the screen of the unit. Press this 
button again to resume the image.

Mode selection

•  Press repeatedly MOD button 

on the panel or MODE button on the 
RC to select between Radio, USB, 
Memory Card and auxiliary input 
(AUX), operation modes. Modes of 
operation are indicated on the display. 
Memory card and USB modes are not 
available unless a memory card or 
USB device is connected.

•  Or, in radio or AUX modes, press 

 button on the panel or 

 button on 

the RC to display the main menu. In 
the menu select an operation mode by 
rotating VOLUME knob on the panel 
or pressing UP/DOWN cursor buttons 
on the RC, then press OK button on 
the RC or SELECT button on the 
panel to confirm selection.

Volume control

Adjust volume by rotating VOLUME 

knob on the panel or pressing V+/V- 
buttons on the RC.

Mute function

Press MUTE button on the panel 

or on the RC to switch off the sound; 
press it again or adjust volume to 
resume the sound.

Audio parameter setting

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
to select a parameter: VOL (volume) 
=> BAS (bass) => TRE (treble) => 
BAL (balance) => FAD (fader) => EQ 
(equalizer) => Beep => Loud ON/OFF. 
Rotate VOLUME knob on the panel or 
pressing V+/V- buttons on the RC to 
adjust each mode:

•  Volume: from 0 to 39;
•  Bass/Treble: from -7 to 7;
•  Balance: L7 (left) to R7 (right);
•  Fader: from R7 (rear) to F7 (front);
•  EQ: select OFF/ROCK/POP/

CLASS equalizer mode;

•  Beep on: the beep sound is heard 

when a button is pressed; beep off: 
the sound is not heard;

•  Loudness: select ON or OFF. 

Activating this feature will enhance 
bass and treble frequencies when 
listening to music at low volumes.

  When equalizer is in any mode