Bosch 0.601.5A6.100 - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 92A 33H | (9.9.16)

Bosch Power Tools



When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair 
person using only identical replacement parts. 

This will 

ensure that the safety of the power tool is maintained.

Safety Warnings for Jigsaws



Hold power tool by insulated gripping surfaces, when 
performing an operation where the cutting accessory 
may contact hidden wiring. 

Cutting accessory contacting 

a “live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.



Keep hands away from the sawing range. Do not reach 
under the workpiece. 

Contact with the saw blade can 

lead to injuries.



Apply the machine to the workpiece only when switched 
on. 

Otherwise there is danger of kickback when the cutting 

tool jams in the workpiece.



Pay attention that the base plate 7 rests securely on 
the material while sawing. 

A jammed saw blade can 

break or lead to kickback.



When the cut is completed, switch off the machine and 
then pull the saw blade out of the cut only after it has 
come to a standstill. 

In this manner you can avoid kick-

back and can place down the machine securely.



Use only undamaged saw blades that are in perfect con-
dition. 

Bent or dull saw blades can break, negatively influ-

ence the cut, or lead to kickback.



Do not brake the saw blade to a stop by applying side 
pressure after switching off. 

The saw blade can be dam-

aged, break or cause kickback.



Use appropriate detectors to determine if utility lines 
are hidden in the work area or call the local utility com-
pany for assistance. 

Contact with electric lines can lead 

to fire and electric shock. Damaging a gas line can lead to 
explosion. Penetrating a water line causes property dam-
age.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport 
and storage, remove the battery from the power tool. 

There is danger of injury when unintentionally actuating 
the On/Off switch.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, 
vapours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery pack can be damaged by pointed objects 
such as nails or screwdrivers or by force applied exter-
nally. 

An internal short circuit can occur and the battery 

pack can burn, smoke, explode or overheat.

Product Description and 
Specifications

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while 
resting firmly on the workpiece.

GST 18 V-LI S: 

The machine is suitable for straight and curved 

cuts.

GST 18 V-LI B: 

The machine is suitable for straight and 

curved cuts with mitre angles of up to 45 °.

The saw blade recommendations are to be observed.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Lock-off button for On/Off switch

2

On/Off switch

3

Battery pack *

4

Battery unlocking button

5

Hex key  (only GST 18 V-LI B)

6

Plastic guide plate

7

Base plate

8

Adjusting lever for orbital action

9

Guide roller

10

Saw blade *

OBJ_BUCH-2148-004.book  Page 14  Friday, September 9, 2016  9:14 AM