Mitsubishi Electric MSZ-GF60VE - Инструкция по эксплуатации - Страница 6

En-5

● OPERATING INSTRUCTIONS ●

F

AN SPEED AND  

AIRFLOW DIRECTION ADJUSTMENT

Press 

 to select fan speed. Each press changes 

fan speed in the following order:

• Two short beeps are heard from the indoor unit when set to AUTO.

• Use higher fan speed to cool/heat the room quicker. It is recommended 

to lower the fan speed once the room is cool/warm.

• Use lower fan speed for quiet operation.

Note:

Multi system operation

When several indoor units are operated simultaneously by one outdoor unit for 

heating operation, the temperature of the airfl ow may be low. In this case, it is 

recommended to set the fan speed to AUTO.

Press 

 to select airfl ow direction. Each press 

changes airfl ow direction in the following order:

•  Two short beeps are heard from the indoor unit when set to AUTO.

Press 

 to select horizontal airfl ow direction. Each 

press changes airfl ow direction in the following order:

Airflow direction

  (AUTO) .........The vane is set to the most effi cient airfl ow direction. COOL/

DRY:horizontal position. HEAT:position (5).

  (Manual) .......For  efficient  air  conditioning,  select  the  upper  position  for 

COOL/DRY,  and  the  lower  position  for  HEAT.  If  the  lower 

position is selected during COOL/DRY, the vane automatically 

moves to the horizontal position after 0.5 to 1 hour to prevent 

any condensation from dripping.

  (Swing) .........The vane moves up and down intermittently.

  (AUTO)  (Silent) 

(Low) 

(Med.) 

(High)  (Super High)

 (AUTO) 

(1) 

 (2) 

(3) 

(4) 

(5)  (SWING)

(SWING)

L

ONG OPERATION

Press 

 to start LONG operation.

•  Fan speed increases and the horizontal vane moves to the position for 

LONG mode.

•  Air reaches to longer distance.

Press 

 again to cancel LONG operation.

•  LONG  operation  is  cancelled  when  the  ON/OFF,  VANE,  or  ECONO 

COOL button is pressed.

Press 

 during COOL or HEAT mode 

 Page 4 

 to 

start POWERFUL operation.

Fan speed 

:  Exclusive speed for POWERFUL mode 

Horizontal vane  :  Set  position,  or  downward  airflow  position  during 

AUTO setting

•  Temperature cannot be set during POWERFUL operation.

Press 

 again to cancel POWERFUL operation. 

•  POWERFUL  operation  also  is  cancelled  automatically  in  15  min-

utes,  or  when  the  ON/OFF,  FAN,  ECONO  COOL,  or  i-save  button  is 

pressed.

P

OWERFUL OPERATION

JG79A927H01_en.indd   5

7/2/2014   11:44:07 AM