Elenberg SPT-7090 - Инструкция по эксплуатации - Страница 37

Кондиционеры Elenberg SPT-7090 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 48
Загружаем инструкцию
background image

37

Wireless remote control is 

not available.

•  The unit is interfered by abnormal or frequent func

-

tions switch over occasionally the controller cannot 

operate.  At  this  time,  you  need  to  pull  out  of  the 

plug, and reinsert it.

•  Is it in its receiving range? Or obstructed?

•  To check the voltage in wireless remote control in

-

side is charged, other wise to replace the batteries.

•  Whether the wireless remote control is damaged.

If water leakage in the 

room.

•  The air humidity is on the high side.

•  Condensing water over lowed.

•  The  connection  position  of  indoor  unit  drainage 

pipe is loosed.

If water leakage in out

-

door unit.

•  When  the  unit  is  running  in  COOL  mode,  the  pipe 

and connection of pipe would be condensed due 

to the water cooled down.

•  When  the  unit  is  running  in  Auto  Defrosting  mode, 

the ice thawed and lowed out.

•  When  the  unit  is  running  in  HEAT  mode,  the  water 

adhered on heat exchanger dripped off.

Noise from indoor unit 

emitted.

•  The sound of fan or compressor relay is switching on 

or off.

•  When the defrosting is started or stop running, it will 

sound.  That  is  due  to  the  refrigerant  lowed  to  the 

reverse direction.

Indoor unit cannot de

-

liver air.

•  In  dehumidifying  mode,  sometimes  indoor  fan  will 

stop, in order to avoid condensing water be vapor

-

ized again, restrain temperature rising.

•  In  HEAT  mode,  when  the  temperature  of  indoor 

heat exchanger is very low, that will stop deliver air 

in order to prevent cool air. (Within 3 min)

•  In HEAT mode, when the outdoor temperature is low 

or  high  humidity,  there  are  much  frost  be  formed 

on  the  outdoor  heat  exchanger,  that  the  unit  will 

automatically  defrost,  indoor  unit  stop  blowing  air 

for  3-12  mins.  During  the  defrosting,  there  is  water 

lowing out or vapor be produced.

Moisture on air outlet 

vent.

If  unit  is  running  under  the  high  humidity  for  a  long 

time, the moisture will be condensed on the air outlet 

grill and drip off.

Immediately stop all operations and plug out, contact the dealer in following situa

-

tions:

•  There is harsh sound during operation.

•  The terrible odors emitted during operation.

•  Water is leaking in the room.

•  Air switch or protection switch often breaks.

•  Carelessy splash water or something into unit.

•  There is an abnormal heat in power supply cord and power plug.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Elenberg SPT-7090?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"