Elenberg PRT-9050 - Инструкция по эксплуатации - Страница 35

Maintenance

35

Appliance maintenance

Протрите устройство мягкой, сухой тряпочкой.
Если устройство очень грязное, используйте
для очистки прохладную воду (ниже 40°C).

Wipe with a
soft and dry

cloth.

Use lukewarm water
(below 40) to clean
if the appliance is very dirty.

Never use volatile substance such as
gasoline or polishing powder to clean
the appliance.

Air filter maintenance

It is necessary to clean the air filter after using
it for about 100 hours.
Clean it as follows:

Stop the appliance and
remove the air filter.

Stop the appliance first, then
push up the air filter.

Clean and reinstall the air filter.

If the dirt is conspicuous, wash it with a solu+
tion of detergent in luke+
warm water. After clean+
ing, dry it in a shaded and
cool place, the reinstall it.

Clean the air filter every two weeks if
the air conditioner operates in an
extremely dusty environment.

Turn off the appliance first
before disconnecting from
power supply.

Use a dry and soft
cloth to clean it.

Dangerous!

Electric shock!

Maintenance after using

1.   If the appliance will not be used for a long time, be sure to Pull out the rubber plug of the drain

port underside, in order to drain the water.

2.  Keep the appliance running with fan only for a half day during a sunnyday to dry the appliance

inside and prevent from going moldy.

3.  Stop the appliance and pull out the power supply plug, then take out the batteries of remote

controller and store appliance properly.

4.  Clean the air filter and reinstall it.
5.  Remove the air hoses and store them properly, and cover the hole tightly

Cut off the power supply

Never sprinkle water onto the main
unit